[Codel] [RFCv2 2/3] ath10k: report per-station tx/rate rates to mac80211

Michal Kazior michal.kazior at tieto.com
Thu Mar 24 03:49:12 EDT 2016


On 24 March 2016 at 08:19, Mohammed Shafi Shajakhan
<mohammed at codeaurora.org> wrote:
> Hi Michal,
>
> On Wed, Mar 16, 2016 at 11:17:57AM +0100, Michal Kazior wrote:
>> The rate control is offloaded by firmware so it's
>> challanging to provide expected throughput value
>> for given station.
>>
>> This approach is naive as it reports last tx rate
>> used for given station as provided by firmware
>> stat event.
>>
>> This should be sufficient for airtime estimation
>> used for fq-codel-in-mac80211 tx scheduling
>> purposes now.
>>
>> This patch uses a very hacky way to get the stats.
>> This is sufficient for proof-of-concept but must
>> be cleaned up properly eventually.
>>
>> Signed-off-by: Michal Kazior <michal.kazior at tieto.com>
>> ---
>>  drivers/net/wireless/ath/ath10k/core.h  |  5 +++
>>  drivers/net/wireless/ath/ath10k/debug.c | 61 +++++++++++++++++++++++++++++----
>>  drivers/net/wireless/ath/ath10k/mac.c   | 26 ++++++++------
>>  drivers/net/wireless/ath/ath10k/wmi.h   |  2 +-
>>  4 files changed, 76 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
>> index 23ba03fb7a5f..3f76669d44cf 100644
>> --- a/drivers/net/wireless/ath/ath10k/core.h
>> +++ b/drivers/net/wireless/ath/ath10k/core.h
>> @@ -331,6 +331,9 @@ struct ath10k_sta {
>>       /* protected by conf_mutex */
>>       bool aggr_mode;
>>       u64 rx_duration;
>> +
>> +     u32 tx_rate_kbps;
>> +     u32 rx_rate_kbps;
>>  #endif
>>  };
>>
>> @@ -372,6 +375,8 @@ struct ath10k_vif {
>>       s8 def_wep_key_idx;
>>
>>       u16 tx_seq_no;
>> +     u32 tx_rate_kbps;
>> +     u32 rx_rate_kbps;
>>
>>       union {
>>               struct {
>> diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
>> index 076d29b53ddf..cc7ebf04ae00 100644
>> --- a/drivers/net/wireless/ath/ath10k/debug.c
>> +++ b/drivers/net/wireless/ath/ath10k/debug.c
>> @@ -316,6 +316,58 @@ static void ath10k_debug_fw_stats_reset(struct ath10k *ar)
>>       spin_unlock_bh(&ar->data_lock);
>>  }
>>
>> +static void ath10k_mac_update_txrx_rate_iter(void *data,
>> +                                          u8 *mac,
>> +                                          struct ieee80211_vif *vif)
>> +{
>> +     struct ath10k_fw_stats_peer *peer = data;
>> +     struct ath10k_vif *arvif;
>> +
>> +     if (memcmp(vif->addr, peer->peer_macaddr, ETH_ALEN))
>> +             return;
>> +
>> +     arvif = (void *)vif->drv_priv;
>> +     arvif->tx_rate_kbps = peer->peer_tx_rate;
>> +     arvif->rx_rate_kbps = peer->peer_rx_rate;
>> +}
>> +
>> +static void ath10k_mac_update_txrx_rate(struct ath10k *ar,
>> +                                     struct ath10k_fw_stats *stats)
>> +{
>> +     struct ieee80211_hw *hw = ar->hw;
>> +     struct ath10k_fw_stats_peer *peer;
>> +     struct ath10k_sta *arsta;
>> +     struct ieee80211_sta *sta;
>> +     const u8 *localaddr = NULL;
>> +
>> +     rcu_read_lock();
>> +
>> +     list_for_each_entry(peer, &stats->peers, list) {
>> +             /* This doesn't account for multiple STA connected on different
>> +              * vifs. Unfortunately there's no way to derive that from the available
>> +              * information.
>> +              */
>> +             sta = ieee80211_find_sta_by_ifaddr(hw,
>> +                                                peer->peer_macaddr,
>> +                                                localaddr);
>> +             if (!sta) {
>> +                     /* This tries to update multicast rates */
>> +                     ieee80211_iterate_active_interfaces_atomic(
>> +                                     hw,
>> +                                     IEEE80211_IFACE_ITER_NORMAL,
>> +                                     ath10k_mac_update_txrx_rate_iter,
>> +                                     peer);
>> +                     continue;
>> +             }
>> +
>> +             arsta = (void *)sta->drv_priv;
>> +             arsta->tx_rate_kbps = peer->peer_tx_rate;
>> +             arsta->rx_rate_kbps = peer->peer_rx_rate;
>> +     }
>> +
>> +     rcu_read_unlock();
>> +}
>> +
>>  void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
>>  {
>>       struct ath10k_fw_stats stats = {};
>> @@ -335,6 +387,8 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
>>               goto free;
>>       }
>>
>> +     ath10k_mac_update_txrx_rate(ar, &stats);
>> +
>>       /* Stat data may exceed htc-wmi buffer limit. In such case firmware
>>        * splits the stats data and delivers it in a ping-pong fashion of
>>        * request cmd-update event.
>> @@ -351,13 +405,6 @@ void ath10k_debug_fw_stats_process(struct ath10k *ar, struct sk_buff *skb)
>>       if (peer_stats_svc)
>>               ath10k_sta_update_rx_duration(ar, &stats.peers);
>>
>> -     if (ar->debug.fw_stats_done) {
>> -             if (!peer_stats_svc)
>> -                     ath10k_warn(ar, "received unsolicited stats update event\n");
>> -
>> -             goto free;
>> -     }
>> -
>
> [shafi] As you had suggested previously, should we completely clean up this ping
> - pong response approach for f/w stats, (or) this should be retained to support
> backward compatibility and also for supporting ping - pong response when user
> cats for fw-stats (via debugfs) (i did see in the commit message this needs to
> be cleaned up)

I think it makes sense to remove the ping-pong logic and rely on
periodic updates alone, including fw_stats and ethstats handling.


>> -     if (test_bit(WMI_SERVICE_PEER_STATS, ar->wmi.svc_map)) {
>> -             param = ar->wmi.pdev_param->peer_stats_update_period;
>> -             ret = ath10k_wmi_pdev_set_param(ar, param,
>> -                                             PEER_DEFAULT_STATS_UPDATE_PERIOD);
>> -             if (ret) {
>> -                     ath10k_warn(ar,
>> -                                 "failed to set peer stats period : %d\n",
>> -                                 ret);
>> -                     goto err_core_stop;
>> -             }
>> +     param = ar->wmi.pdev_param->peer_stats_update_period;
>> +     ret = ath10k_wmi_pdev_set_param(ar, param,
>> +                                     PEER_DEFAULT_STATS_UPDATE_PERIOD);
>> +     if (ret) {
>> +             ath10k_warn(ar,
>> +                         "failed to set peer stats period : %d\n",
>> +                         ret);
>> +             goto err_core_stop;
>>       }
>
> [shafi] If i am correct this change requires 'PEER_STATS' to be enabled by
> default.

No, it does not. Periodic stats have been available since forever.


>> diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
>> index 4d3cbc44fcd2..2877a3a27b95 100644
>> --- a/drivers/net/wireless/ath/ath10k/wmi.h
>> +++ b/drivers/net/wireless/ath/ath10k/wmi.h
>> @@ -3296,7 +3296,7 @@ struct wmi_csa_event {
>>  /* the definition of different PDEV parameters */
>>  #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
>>  #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
>> -#define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
>> +#define PEER_DEFAULT_STATS_UPDATE_PERIOD    100
>
> [shafi] Is this for more granularity since 500ms is not sufficient ?, I understand
> the firmware has default stats_update_period as 500ms and i hope it supports
> 100ms as well, Also if we are going to support period stats update we may need to
> accumulate the information in driver (like this change and rx_duration

The patch is used for rough rate estimation which is used to keep Tx
queues filled only with 1-2 txops worth of data. Signal conditions can
change vastly so I figured I need the peer stat update events come
more often. I didn't really verify if they come every 100ms. The patch
already served it's job as a proof-of-concept for smarter tx queuing.


> I will try to take this change, rebase it to TOT and see how it goes.

There's really no benefit it taking this patch as a basis for periodic
stat handling. Majority of this patch is just handling peer_tx_rate
for rate estimation purposes. Feel free to knock yourself out with
ripping out the ping-pong stat stuff though :)


MichaƂ


More information about the Codel mailing list