[Make-wifi-fast] Updated LEDE build with airtime patches
Dave Taht
dave.taht at gmail.com
Tue Dec 6 15:59:56 EST 2016
secondly you are measuring the rrul test. we have not fixed wifi qos.
rrul_be will give you vastly better results on both chipsets.
On Tue, Dec 6, 2016 at 12:58 PM, Dave Taht <dave.taht at gmail.com> wrote:
> the ath10k remains unfixed. the 2.4ghz ath9k has all the needed patches
>
> On Tue, Dec 6, 2016 at 12:54 PM, Loganaden Velvindron
> <loganaden at gmail.com> wrote:
>> My new test setup is
>> rpi2--archer c7----(wifi)-fedora laptop (atheros wifi and fq_codel by default)
>>
>> The results are somewhat not what I expected. I am seeing relatively
>> large latencies at close range for the rpi2 server which is plugged
>> into the archer v2 in-built switch.
>>
>> Any pointer as to what I need to tweak to reach 40ms latency under load ?
>>
>> root at lede:/sys# cat kernel/debug/ieee80211/phy1/netdev\:wlan1/aqm
>> ac backlog-bytes backlog-packets new-flows drops marks overlimit
>> collisions tx-bytes tx-packets
>> 2 0 0 187 0 0 0 0 39948 187
>>
>> _______________________________________________
>> Make-wifi-fast mailing list
>> Make-wifi-fast at lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/make-wifi-fast
>
>
>
> --
> Dave Täht
> Let's go make home routers and wifi faster! With better software!
> http://blog.cerowrt.org
--
Dave Täht
Let's go make home routers and wifi faster! With better software!
http://blog.cerowrt.org
More information about the Make-wifi-fast
mailing list