[Make-wifi-fast] [Cake] Airtime fairness patch merged upstream, and the Turris Omnia debloated

[Jaap Buurman]

Is this planned to be added in the current LEDE trunk? And if so, is there
an ETA? Sounds like an amazing feature to have by default in all LEDE
builds, similar to the current Ath9k airtime fairness patch :)

On Dec 25, 2016 19:41, "Noah Causin" <n0manletter at gmail.com> wrote:

> It probably does not have the ath10k softqueues patch from Toke's
> repository.
>
>
> On 12/25/2016 12:16 PM, Dave Täht wrote:
>
>>
>> On 12/25/16 12:06 PM, Toke Høiland-Jørgensen wrote:
>>
>>> Valent Turkovic <valent at otvorenamreza.org> writes:
>>>
>>> Please send just a short notification as soon as Lede with airfairness
>>>> has been released, I have really good real world location that can
>>>> test how effective it works...
>>>>
>>> It should be in the nightly LEDE builds by now :)
>>>
>> I just installed the dec 25th build for the ubnt uaplite.
>>
>> airtime fairness/fq_codel appears in there for the ath9k.
>>
>> regrettably the ath10k in that box is not picking up the fq_codel code.
>> Too old firmware? Too old chipset?
>>
>> root at fqcodel:/etc/config# dmesg | grep ath10k
>> [   27.720253] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1
>> irq_mode 0 reset_mode 0
>> [   27.938406] ath10k_pci 0000:00:00.0: Direct firmware load for
>> ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2
>> [   27.949483] ath10k_pci 0000:00:00.0: Falling back to user helper
>> [   28.140816] firmware ath10k!pre-cal-pci-0000:00:00.0.bin:
>> firmware_loading_store: map pages failed
>> [   28.150362] ath10k_pci 0000:00:00.0: Direct firmware load for
>> ath10k/cal-pci-0000:00:00.0.bin failed with error -2
>> [   28.161085] ath10k_pci 0000:00:00.0: Falling back to user helper
>> [   35.436780] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c
>> chip_id 0x043222ff sub 0000:0000
>> [   35.446345] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1
>> tracing 0 dfs 1 testmode 1
>> [   35.459369] ath10k_pci 0000:00:00.0: firmware ver 10.2.4.70.59-2 api
>> 5 features no-p2p,raw-mode,mfp crc32 4159f498
>> [   35.470177] ath10k_pci 0000:00:00.0: Direct firmware load for
>> ath10k/QCA988X/hw2.0/board-2.bin failed with error -2
>> [   35.480968] ath10k_pci 0000:00:00.0: Falling back to user helper
>> [   35.558782] firmware ath10k!QCA988X!hw2.0!board-2.bin:
>> firmware_loading_store: map pages failed
>> [   35.575232] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A
>> crc32 bebc7c08
>> [   36.684593] ath10k_pci 0000:00:00.0: htt-ver 2.1 wmi-op 5 htt-op 2
>> cal file max-sta 128 raw 0 hwcrypto 1
>>
>>
>> -Toke
>>> _______________________________________________
>>> Make-wifi-fast mailing list
>>> Make-wifi-fast at lists.bufferbloat.net
>>> https://lists.bufferbloat.net/listinfo/make-wifi-fast
>>>
>>> _______________________________________________
>> Make-wifi-fast mailing list
>> Make-wifi-fast at lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/make-wifi-fast
>>
>
> _______________________________________________
> Make-wifi-fast mailing list
> Make-wifi-fast at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/make-wifi-fast
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/make-wifi-fast/attachments/20161225/78dcb83f/attachment.html>