[Make-wifi-fast] [PATCH 1/2] ath9k: use mac80211 intermediate software queues

[Felix Fietkau]

On 2016-06-17 15:48, Felix Fietkau wrote:
> On 2016-06-17 15:43, Toke Høiland-Jørgensen wrote:
>> Felix Fietkau <nbd at nbd.name> writes:
>> 
>>> On 2016-06-17 11:09, Toke Høiland-Jørgensen wrote:
>>>> This patch leaves the code for ath9k's internal per-node per-tid
>>>> queues in place and just modifies the driver to also pull from
>>>> the new mac80211 intermediate software queues, and implements
>>>> the .wake_tx_queue method, which will cause mac80211 to deliver
>>>> packets to be sent via the new intermediate queue.
>>>> 
>>>> Signed-off-by: Tim Shepard <shep at alum.mit.edu>
>>>> 
>>>> Reworked to not require the global variable renaming in ath9k.
>>>> 
>>>> Signed-off-by: Toke Høiland-Jørgensen <toke at toke.dk>
>>>> ---
>>>>  drivers/net/wireless/ath/ath9k/ath9k.h     |  16 +++-
>>>>  drivers/net/wireless/ath/ath9k/debug_sta.c |   7 +-
>>>>  drivers/net/wireless/ath/ath9k/init.c      |   1 +
>>>>  drivers/net/wireless/ath/ath9k/main.c      |   1 +
>>>>  drivers/net/wireless/ath/ath9k/xmit.c      | 119 +++++++++++++++++++++++++----
>>>>  5 files changed, 125 insertions(+), 19 deletions(-)
>>>> 
>>>> diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
>>>> index 93b3793..caeae10 100644
>>>> --- a/drivers/net/wireless/ath/ath9k/ath9k.h
>>>> +++ b/drivers/net/wireless/ath/ath9k/ath9k.h
>>>> @@ -145,8 +145,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
>>>>  #define BAW_WITHIN(_start, _bawsz, _seqno) \
>>>>  	((((_seqno) - (_start)) & 4095) < (_bawsz))
>>>>  
>>>> -#define ATH_AN_2_TID(_an, _tidno)  (&(_an)->tid[(_tidno)])
>>>> -
>>>>  #define IS_HT_RATE(rate)   (rate & 0x80)
>>>>  #define IS_CCK_RATE(rate)  ((rate >= 0x18) && (rate <= 0x1e))
>>>>  #define IS_OFDM_RATE(rate) ((rate >= 0x8) && (rate <= 0xf))
>>>> @@ -232,8 +230,10 @@ struct ath_buf {
>>>>  
>>>>  struct ath_atx_tid {
>>>>  	struct list_head list;
>>>> +	struct sk_buff_head i_q;
>>> Do we really need a third queue here? Instead of adding yet another
>>> layer of queueing here, I think we should even get rid of buf_q.
>> 
>> This is definitely something that needs to be improved. One other
>> sticking point related to this: in the current version of this patch
>> ath_tid_has_buffered() gains a side effect of pulling from the mac80211
>> txq, which is obviously not so nice.
>> 
>> The obvious way to get rid of this is to export a txq_has_buffered()
>> function at the mac80211 layer. But avoiding that may be possible; the
>> sticking point is what to do with the code paths that do not dequeue
>> packets, but check ath_tid_has_buffered() to decide whether to schedule
>> the queue and/or to tell ieee80211_sta_set_buffered() about it (these
>> are for instance ath_tx_aggr_sleep/wakeup(). Can those just be removed
>> (i.e. don't call into ieee80211, and always schedule the txq on wakeup?
>> I'm not familiar enough with the intermediate queues to make that
>> call...
> For tx scheduling, we can use swq_nonempty and deal with false positives.
> For power save we should only use ieee80211_sta_set_buffered if the
> driver itself has buffered some frames. Indication of packets in the
> mac80211 intermediate queue is already taken care of inside mac80211.
One more thing that I forgot in my previous reply: on PS wakeup, the
driver does not need to schedule the intermediate queues itself -
mac80211 will call drv_wake_tx_queue if frames are pending.

- Felix