[Make-wifi-fast] [Codel] fq_codel_drop vs a udp flood
leroi.lists at gmail.com
Thu May 5 12:42:08 EDT 2016
On 5 May 2016 at 19:25, Roman Yeryomin <leroi.lists at gmail.com> wrote:
> On 5 May 2016 at 19:12, Eric Dumazet <eric.dumazet at gmail.com> wrote:
>> On Thu, 2016-05-05 at 17:53 +0300, Roman Yeryomin wrote:
>>> qdisc fq_codel 0: dev eth0 root refcnt 2 limit 1024p flows 1024
>>> quantum 1514 target 5.0ms interval 100.0ms ecn
>>> Sent 12306 bytes 128 pkt (dropped 0, overlimits 0 requeues 0)
>>> backlog 0b 0p requeues 0
>>> maxpacket 0 drop_overlimit 0 new_flow_count 0 ecn_mark 0
>>> new_flows_len 0 old_flows_len 0
>> Limit of 1024 packets and 1024 flows is not wise I think.
>> (If all buckets are in use, each bucket has a virtual queue of 1 packet,
>> which is almost the same than having no queue at all)
>> I suggest to have at least 8 packets per bucket, to let Codel have a
>> chance to trigger.
>> So you could either reduce number of buckets to 128 (if memory is
>> tight), or increase limit to 8192.
> Will try, but what I've posted is default, I didn't change/configure that.
So it didn't change anything :(
Do you want new stats?
More information about the Make-wifi-fast