[Make-wifi-fast] [Codel] fq_codel_drop vs a udp flood
Agarwal, Anil
Anil.Agarwal at viasat.com
Tue May 3 08:50:23 EDT 2016
I should be more precise about the statement about the inaccuracy of the algorithm.
Given that we dequeue packets in round robin manner, the maxqidx value may, on occasions, point to a queue
which is smaller than the largest queue by up to one MTU.
Anil
-----Original Message-----
From: Codel [mailto:codel-bounces at lists.bufferbloat.net] On Behalf Of Agarwal, Anil
Sent: Tuesday, May 03, 2016 8:40 AM
To: Dave Taht; Jonathan Morton
Cc: make-wifi-fast at lists.bufferbloat.net; codel at lists.bufferbloat.net; ath10k
Subject: Re: [Codel] fq_codel_drop vs a udp flood
Dave et al,
Here is another possible approach to improving the code performance when dropping packets.
Keep track of the queue with the largest number of packets, as you go, using an efficient algorithm.
Consequently, a search is not required when the occasion arises.
There is a small amount of overhead for every packet enqueue and dequeue operation.
Here is some pseudo-code -
// Called after enqueuing a packet with updated queue length
static inline void
maxq_update_enq(q, idx, qlen)
{
if (qlen > q->maxqlen) {
q->maxqlen = qlen;
q->maxqidx = idx;
}
}
// Called after dequeuing a packet with updated queue length
static inline void
maxq_update_deq(q, idx, qlen)
{
if (idx == q->maxqidx) {
q->maxqlen = qlen;
}
}
// Returns idx of the largest queue
static inline int
maxq_get_idx(q)
{
return (q->maxqidx);
}
Given that we dequeue packets in round robin manner, the maxqidx value may sometimes be slightly inaccurate, perhaps pointing to the second largest queue on occasions.
The code will scale gracefully to handle larger number of queues and multiple unresponsive flows.
Please see if this makes sense. I have not gone through the fq_codel code in detail.
I had sent a similar suggestion to Rong Pan of the PIE group few months ago; not sure if they ever got to it.
Regards,
Anil
-----Original Message-----
From: Codel [mailto:codel-bounces at lists.bufferbloat.net] On Behalf Of Dave Taht
Sent: Tuesday, May 03, 2016 1:22 AM
To: Jonathan Morton
Cc: make-wifi-fast at lists.bufferbloat.net; codel at lists.bufferbloat.net; ath10k
Subject: Re: [Codel] fq_codel_drop vs a udp flood
On Mon, May 2, 2016 at 7:26 PM, Dave Taht <dave.taht at gmail.com> wrote:
> On Sun, May 1, 2016 at 11:20 AM, Jonathan Morton <chromatix99 at gmail.com> wrote:
>>
>>> On 1 May, 2016, at 20:59, Eric Dumazet <eric.dumazet at gmail.com> wrote:
>>>
>>> fq_codel_drop() could drop _all_ packets of the fat flow, instead of
>>> a single one.
>>
>> Unfortunately, that could have bad consequences if the “fat flow” happens to be a TCP in slow-start on a long-RTT path. Such a flow is responsive, but on an order-magnitude longer timescale than may have been configured as optimum.
>>
>> The real problem is that fq_codel_drop() performs the same (excessive) amount of work to cope with a single unresponsive flow as it would for a true DDoS. Optimising the search function is sufficient.
>
> Don't think so.
>
> I did some tests today, (not the fq_codel batch drop patch yet)
>
> When hit with a 900mbit flood, cake shaping down to 250mbit, results
> in nearly 100% cpu use in the ksoftirq1 thread on the apu2, and
> 150mbits of actual throughput (as measured by iperf3, which is now a
> measurement I don't trust)
>
> cake *does* hold the packet count down a lot better than fq_codel does.
>
> fq_codel (pre eric's patch) basically goes to the configured limit and
> stays there.
>
> In both cases I will eventually get an error like this (in my babel
> routed environment) that suggests that we're also not delivering
> packets from other flows (arp?) with either fq_codel or cake in these
> extreme conditions.
>
> iperf3 -c 172.26.64.200 -u -b900Mbit -t 600
>
> [ 4] 47.00-48.00 sec 107 MBytes 895 Mbits/sec 13659
> iperf3: error - unable to write to stream socket: No route to host
>
> ...
>
> The results I get from iperf are a bit puzzling over the interval it
> samples at - this is from a 100Mbit test (downshifting from 900mbit)
>
> [ 15] 25.00-26.00 sec 152 KBytes 1.25 Mbits/sec 0.998 ms
> 29673/29692 (1e+02%)
> [ 15] 26.00-27.00 sec 232 KBytes 1.90 Mbits/sec 1.207 ms
> 10235/10264 (1e+02%)
> [ 15] 27.00-28.00 sec 72.0 KBytes 590 Kbits/sec 1.098 ms
> 19035/19044 (1e+02%)
> [ 15] 28.00-29.00 sec 0.00 Bytes 0.00 bits/sec 1.098 ms 0/0 (-nan%)
> [ 15] 29.00-30.00 sec 72.0 KBytes 590 Kbits/sec 1.044 ms
> 22468/22477 (1e+02%)
> [ 15] 30.00-31.00 sec 64.0 KBytes 524 Kbits/sec 1.060 ms
> 13078/13086 (1e+02%)
> [ 15] 31.00-32.00 sec 0.00 Bytes 0.00 bits/sec 1.060 ms 0/0 (-nan%)
> ^C[ 15] 32.00-32.66 sec 64.0 KBytes 797 Kbits/sec 1.050 ms
> 25420/25428 (1e+02%)
OK, the above weirdness in calculating a "rate" is due to me sending 8k fragmented packets.
-l1470 fixed that.
> Not that I care all that much about how iperf is intepreting it's drop
> rate (I guess pulling apart the actual caps is in order).
>
> As for cake struggling to cope:
>
> root at apu2:/home/d/git/tc-adv/tc# ./tc -s qdisc show dev enp2s0
>
> qdisc cake 8018: root refcnt 9 bandwidth 100Mbit diffserv4 flows rtt
> 100.0ms raw Sent 219736818 bytes 157121 pkt (dropped 989289,
> overlimits 1152272 requeues 0) backlog 449646b 319p requeues 0
> memory used: 2658432b of 5000000b capacity estimate: 100Mbit
> Bulk Best Effort Video Voice
> thresh 100Mbit 93750Kbit 75Mbit 25Mbit
> target 5.0ms 5.0ms 5.0ms 5.0ms
> interval 100.0ms 100.0ms 100.0ms 100.0ms
> pk_delay 0us 5.2ms 92us 48us
> av_delay 0us 5.1ms 4us 2us
> sp_delay 0us 5.0ms 4us 2us
> pkts 0 1146649 31 49
> bytes 0 1607004053 2258 8779
> way_inds 0 0 0 0
> way_miss 0 15 2 1
> way_cols 0 0 0 0
> drops 0 989289 0 0
> marks 0 0 0 0
> sp_flows 0 0 0 0
> bk_flows 0 1 0 0
> last_len 0 1514 66 138
> max_len 0 1514 110 487
>
> ...
>
> But I am very puzzled as to why flow isolation would fail in the face
> of this overload.
And to simplify matters I got rid of the advanced qdiscs entirely, switched back to htb+pfifo and get the same ultimate result of the test aborting...
Joy.
OK,
ethtool -s enp2s0 advertise 0x008 # 100mbit
Feeding packets in at 900mbit into a 1000 packet fifo queue at 100Mbit is predictably horriffic... other flows get starved entirely, you can't even type on the thing, and still eventually
[ 28] 28.00-29.00 sec 11.4 MBytes 95.7 Mbits/sec 0.120 ms
72598/80726 (90%)
[ 28] 29.00-30.00 sec 11.4 MBytes 95.7 Mbits/sec 0.119 ms
46187/54314 (85%)
[ 28] 189.00-190.00 sec 8.73 MBytes 73.2 Mbits/sec 0.162 ms
55276/61493 (90%)
[ 28] 190.00-191.00 sec 0.00 Bytes 0.00 bits/sec 0.162 ms 0/0 (-nan%)
vs:
[ 4] 188.00-189.00 sec 105 MBytes 879 Mbits/sec 74614
iperf3: error - unable to write to stream socket: No route to host
Yea! More people should do that to themselves. System is bloody useless with a 1000 packet full queue and way more useful with fq_codel in this scenario...
but still this ping should be surviving with fq_codel going and one full rate udp flood, if it wasn't for all the cpu being used up throwing away packets. I think.
64 bytes from 172.26.64.200: icmp_seq=50 ttl=63 time=6.92 ms
64 bytes from 172.26.64.200: icmp_seq=52 ttl=63 time=7.15 ms
64 bytes from 172.26.64.200: icmp_seq=53 ttl=63 time=7.11 ms
64 bytes from 172.26.64.200: icmp_seq=55 ttl=63 time=6.68 ms
ping: sendmsg: No route to host
ping: sendmsg: No route to host
ping: sendmsg: No route to host
...
OK, tomorrow, eric's new patch! A new, brighter day now that I've burned this one melting 3 boxes into the ground. and perf.
--
Dave Täht
Let's go make home routers and wifi faster! With better software!
https://urldefense.proofpoint.com/v2/url?u=http-3A__blog.cerowrt.org&d=CwIGaQ&c=jcv3orpCsv7C4ly8-ubDob57ycZ4jvhoYZNDBA06fPk&r=FyvaklKYrHaSCPjbBTdviWIW9uSbnxdNSheSGz1Jvq4&m=WA7M8kzfWtPc1BoysOKxcUO1fsm9bQlu_S3Voky3Hi0&s=xsNjZNPfz4WmfJZ4sP7jMTVJe140RgNczcwj6g5rU1g&e=
_______________________________________________
Codel mailing list
Codel at lists.bufferbloat.net
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.bufferbloat.net_listinfo_codel&d=CwIGaQ&c=jcv3orpCsv7C4ly8-ubDob57ycZ4jvhoYZNDBA06fPk&r=FyvaklKYrHaSCPjbBTdviWIW9uSbnxdNSheSGz1Jvq4&m=WA7M8kzfWtPc1BoysOKxcUO1fsm9bQlu_S3Voky3Hi0&s=NTTN7_n6PYwoH6-tlPNWQ2qpYPCsFYiW8VWm3Ih1u5g&e=
_______________________________________________
Codel mailing list
Codel at lists.bufferbloat.net
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.bufferbloat.net_listinfo_codel&d=CwIGaQ&c=jcv3orpCsv7C4ly8-ubDob57ycZ4jvhoYZNDBA06fPk&r=FyvaklKYrHaSCPjbBTdviWIW9uSbnxdNSheSGz1Jvq4&m=sh94VpjR-_N2jAHHqQbnik89iCiFw8Cv0ByrfywQYTo&s=oW_kvgDw9x-ftgF0ozE-JqiRuAm8blm7-22TuVMax2Y&e=
More information about the Make-wifi-fast
mailing list