[Make-wifi-fast] [Bloat] benefits of ack filtering

Bob McMahon bob.mcmahon at broadcom.com
Sun Dec 3 00:20:33 EST 2017


I'm skeptical that this would improve single stream throughput by a factor
of two.   The larger RTT would drive larger aggregations and it's
aggregation that scales peak average throughput.

Also, the time difference between the 802.11 ack and the client network
stack writing the TCP ack would probably be in the 100s of microseconds
(mileage will vary.)  So it's the client's media access that will drive the
increase in RTT.    It might be preferred to modify EDCA parameters to
reduce media access latencies for TCP acks rather than spoof them.

Bob

On Fri, Dec 1, 2017 at 12:39 PM, Juliusz Chroboczek <jch at irif.fr> wrote:

> >> It does increase single-flow TCP throughput by up to a factor of two,
> >> though... Which everyone knows is the most important benchmark number ;)
>
> > Were you always as cynical as I am?
>
> (Giggle)
>
> Dave, you've always underestimated Toke ;-)
> _______________________________________________
> Make-wifi-fast mailing list
> Make-wifi-fast at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/make-wifi-fast
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/make-wifi-fast/attachments/20171202/006ac7c7/attachment.html>


More information about the Make-wifi-fast mailing list