[Make-wifi-fast] [PATCH v2] ath10k: Re-enable TXQs for all devices

[Toke Høiland-Jørgensen]

Commit 4ca1807815aa6801aaced7fdefa9edacc2521767 disables the use of the
mac80211 TXQs for some devices because of a theoretical throughput
regression. The original regression report[1] was related to fq_codel
qdisc drop performance, which was fixed in
9d18562a227874289fda8ca5d117d8f503f1dcca. Since then, we have not seen
the TXQ-related regression, so it should be safe to re-enable TXQs.

[1] http://lists.infradead.org/pipermail/ath10k/2016-April/007266.html

Signed-off-by: Toke Høiland-Jørgensen <toke at toke.dk>
---
This has been in LEDE trunk for a couple of months now with good
results.

Changes since v1:
- Update commit message to refer to original report and the fix for it.
- Add ath10k list to cc

 drivers/net/wireless/ath/ath10k/mac.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0a947eef348d..ca596ecd2d64 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8329,15 +8329,6 @@ int ath10k_mac_register(struct ath10k *ar)
 			ath10k_warn(ar, "failed to initialise DFS pattern detector\n");
 	}
 
-	/* Current wake_tx_queue implementation imposes a significant
-	 * performance penalty in some setups. The tx scheduling code needs
-	 * more work anyway so disable the wake_tx_queue unless firmware
-	 * supports the pull-push mechanism.
-	 */
-	if (!test_bit(ATH10K_FW_FEATURE_PEER_FLOW_CONTROL,
-		      ar->running_fw->fw_file.fw_features))
-		ar->ops->wake_tx_queue = NULL;
-
 	ret = ath10k_mac_init_rd(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to derive regdom: %d\n", ret);
-- 
2.15.0