[NNagain] FCC - delete, delete, delete

[Robert McMahon]

A correction, some additions and a short allegory

o) I'm using 4 APs for 1800 sq ft, but it's two story stacked like two
blocks, so the radius per the RF spray pattern design can (and does)
take advantage of that
o) I placed high quality UPS where needed
o) I didn't mention IoT like irrigation control, PV monitoring,
weather systems, etc. Those are managed by a RPi4 with a UPS board and
battery. Scripts and c - code is written by me.
o) I didn't mention my in home lab/work network where each test device
has it's own GPS signal to get pulse per second from those atomic
clocks. That really helps a lot in my iperf 2 work
o) Having an in home lab gives me back an 30 minute commute (or 1 hr
for both directions) which is a lot and adds up. Unfortunately, my CEO
thinks we're children and need to follow an attendance policy so now I
have to waste time driving to do emails and get an attendance credit.
I started working at age 13 at a Baskin Robbins and within a month the
immigrant owner asked me to run the crews so he and his wife could go
home and rest w/o worrying about their primary means of  income. It's
very sad to be treated like a child, even when a child. SV is run by
children's mindsets now.

Bob

On Sat, Mar 15, 2025 at 11:16 AM Robert McMahon <rjmcmahon at rjmcmahon.com> wrote:
>
> >
> > In case it's not clear. I am NOT happy with how device manufacturers ship old
> > code and never update it.
> >
>
> I was unhappy about my home network and my paying job is to provide
> components for such.
>
> My home network wasn't resilient enough to carry entertainment,
> productivity (including distance learning) and medical traffic.
>
> The fixes so far have been:
>
> o) Don't use an all in one AP anywhere, just use it for wireless bridging
> o) Use a fronthaul architecture (2.5G - will go to 100G when Fi-Wi is ready)
> o) Use a dedicated firewall & dhcp server with AQM such as fq_codel (I
> use a protectcli vault)
> o) Connect the APs (4 for me in 100 sq ft) configured in bridge mode
> and optimize spacetime, allow for proper RF overlap - not too much,
> not too little, but just right like the story says.
> o) Use AP's that support the 6G band
> o) Use keep connect devices to detect AP failures and power cycle them
> (hammer approach)
> o) Use separate ethernet switches where 802.3 switching is needed
> (don't use the AP integrated switches, they go down per the crappy
> gateway sw you're likely talking about)
> o) Implement DHCP guard to protect against rogue DHCP servers
>
> Then for monitoring
> o) Install rpi 5bs with INTC BE200 and pcie Wi-Fi adapters in the
> rooms that need monitoring
> o) Install kismet and integrate with kismet to monitor
> o) Turn on firewall & WAN port monitoring services
>
> Only access to devices is ssh with encryption keys, and configure ssh
> passwordless access.
>
> Now, my family can be entertained, do their work and learning, and use
> their medical instruments with high in-home reliability.
>
> It's a thankless job we Dads must do. The home frustration level goes
> way down and the complaints of "Dad, the internet isn't working again"
> have gone away - except for when the OSP goes down. The OSP provider
> tends to send information to me when that happens so my family can
> work around it.
>
> Bob