[Starlink] dhcpv6-pd details

[Nick Buraglio]

I have this working now between my providers with straight routing and
gateway checking, but it’s pretty easily doable other ways with platforms
like routerOS or pfsense.
FWIW, I’m working with some others on an IETF draft proposal that will
hopefully solve the plaguing problem of multiple IPv6 PD or otherwise
provider assigned address blocks that will make a lot of that easier, too.

nb


On Mon, May 17, 2021 at 2:36 PM David Lang <david at lang.hm> wrote:

> On Mon, 17 May 2021, Nick Buraglio wrote:
>
> > Inline
> >
> > On Mon, May 17, 2021 at 2:15 PM Dave Taht <dave.taht at gmail.com> wrote:
> >>
> >> Starlink provides a router, also? I'm so confused. I thought the dishy
> >> was all there was. Care to tear it apart and describe what's in it?
> >
> > As far as the "router" is concerned, it's very much a consumer grade
> > device that is managed via the mobile app. I hated it, so I took it
> > out. It's still up in the attic. near the cable conduit, if I recall.
>
> Fantastic, I was hoping it would be something like this. I think this
> opens up a
> lot of more useful options (including more easily doing failover between
> the
> dish and other network options)
>
> David  Lang
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/starlink/attachments/20210517/67e01370/attachment.html>