[Starlink] Quick questions about Starlink user terminal

[Sirapop Theeranantachai]

Thank you for very quick responses.
>
> The terminal can only do TX or RX with the selected satellite in
> half-duplex mode.

Just a confirmation, HP terminal can work with two satellites at the same
time, one for only TX, and the other for only RX. Is this statement still
correct?

On Thu, May 11, 2023 at 3:05 PM Oleg Kutkov via Starlink <
starlink at lists.bufferbloat.net> wrote:

> Hello,
>
> On 5/12/23 00:48, Sirapop Theeranantachai via Starlink wrote:
> > 1) Is the commodity hardware capable of forming multiple GSL channels
> > to multiple satellites? If it's not possible, is it possible that the
> > hardware allows multiple downlink but only one uplink?
>
> Regular non-HP terminal works only with one satellite. HP supports
> multiple sats due to a larger antenna field.
> The terminal can only do TX or RX with the selected satellite in
> half-duplex mode.
>
>
> --
> Best regards,
> Oleg Kutkov
>
> _______________________________________________
> Starlink mailing list
> Starlink at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/starlink
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/starlink/attachments/20230511/07884727/attachment-0001.html>