[Starlink] one dish per household is silly.

[Ulrich Speidel]

So that's just over 6 kW if phase and voltage align, which in an 
application like this, they're most likely not going to do most of the time.

The interesting bit in the photo are the large air intakes / outlets, 
which point at the presence of some sort of cooler / aircon unit at the 
base of the radome. Transmitter heat removal and/or receiver cooling (to 
keep the noise floor down)?

On 14/11/2023 5:57 pm, J Pan via Starlink wrote:
> rated power consumption for all components at peak
> https://files.tecnoblog.net/wp-content/uploads/2021/05/starlink-gateway-v3-selo-anatel-700x898.png 
> <https://files.tecnoblog.net/wp-content/uploads/2021/05/starlink-gateway-v3-selo-anatel-700x898.png>
> --
> J Pan, UVic CSc, ECS566, 250-472-5796 (NO VM), Pan at UVic.CA, 
> Web.UVic.CA/~pan 
> <http://Web.UVic.CA/~pan>
>
> On Mon, Nov 13, 2023 at 12:42 PM Inemesit Affia via Starlink
> <starlink at lists.bufferbloat.net> wrote:
> >
> > I don't know why that number didn't trip my antenna.
> > _______________________________________________
> > Starlink mailing list
> > Starlink at lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/starlink 
> <https://lists.bufferbloat.net/listinfo/starlink>
> _______________________________________________
> Starlink mailing list
> Starlink at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/starlink 
> <https://lists.bufferbloat.net/listinfo/starlink>

-- 
****************************************************************
Dr. Ulrich Speidel

School of Computer Science

Room 303S.594 (City Campus)

The University of Auckland
u.speidel at auckland.ac.nz  
http://www.cs.auckland.ac.nz/~ulrich/
****************************************************************


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/starlink/attachments/20231114/09c13199/attachment-0001.html>