[Starlink] one dish per household is silly.

[Alexandre Petrescu]

Le 14/11/2023 à 06:13, Ulrich Speidel via Starlink a écrit :
>
> So that's just over 6 kW if phase and voltage align, which in an 
> application like this, they're most likely not going to do most of the 
> time.
>
> The interesting bit in the photo are the large air intakes / outlets, 
> which point at the presence of some sort of cooler / aircon unit at 
> the base of the radome. Transmitter heat removal and/or receiver 
> cooling (to keep the noise floor down)?
>
Ah, I see what you people mean by consumption: that of teleports, not 
that of end users.  Sorry for my earlier post about the dishy 
electricity consumption.

Alex

> On 14/11/2023 5:57 pm, J Pan via Starlink wrote:
>> rated power consumption for all components at peak
>> https://files.tecnoblog.net/wp-content/uploads/2021/05/starlink-gateway-v3-selo-anatel-700x898.png
>> --
>> J Pan, UVic CSc, ECS566, 250-472-5796 (NO VM), Pan at UVic.CA, 
>> Web.UVic.CA/~pan <http://Web.UVic.CA/~pan>
>>
>> On Mon, Nov 13, 2023 at 12:42 PM Inemesit Affia via Starlink
>> <starlink at lists.bufferbloat.net> wrote:
>> >
>> > I don't know why that number didn't trip my antenna.
>> > _______________________________________________
>> > Starlink mailing list
>> > Starlink at lists.bufferbloat.net
>> > https://lists.bufferbloat.net/listinfo/starlink
>> _______________________________________________
>> Starlink mailing list
>> Starlink at lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/starlink
> -- 
> ****************************************************************
> Dr. Ulrich Speidel
>
> School of Computer Science
>
> Room 303S.594 (City Campus)
>
> The University of Auckland
> u.speidel at auckland.ac.nz  
> http://www.cs.auckland.ac.nz/~ulrich/
> ****************************************************************
>
>
>
>
> _______________________________________________
> Starlink mailing list
> Starlink at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/starlink