From: Bruce Perens <bruce@perens.com>
To: Nathan Owens <nathan@nathan.io>
Cc: "Mr. Clif" <clif@eugeneweb.com>, starlink@lists.bufferbloat.net
Subject: Re: [Starlink] ch-ch-ch-ch-changes!
Date: Fri, 13 May 2022 10:28:19 -0700 [thread overview]
Message-ID: <CAK2MWOvDfcOV-HC=BZeAVxAnE5nwtFgaEDGuZZ0qS2nVmKk=Qw@mail.gmail.com> (raw)
In-Reply-To: <CALjsLJvSCaX0Xt+bck_rjxeqJ1FhbQuEs5E+HVFU9TrakW878Q@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2858 bytes --]
Our Starlink came on in Berkeley after a half hour or so. Unfortunately
there are too many trees around its present location, so it will be moving
to my off-grid site and no Starlink at home for now.
Thanks
Bruce
On Fri, May 13, 2022 at 9:09 AM Nathan Owens <nathan@nathan.io> wrote:
> It will presumably work for now, but if you have "roaming: True" in the
> gRPC data, you'll likely have to pay another $25/mo for Portability, and
> accept slower/degraded service.
>
> On Fri, May 13, 2022 at 9:07 AM Mr. Clif <clif@eugeneweb.com> wrote:
>
>> Hi guys,
>>
>> After waiting for over a year, a couple of weeks ago, our Starlink
>> terminal finally arrived. The original orders I placed never panned out,
>> and eventually were canceled, but when I heard about the new service map
>> feature on the Starlink site, it took all the guess work out of the
>> order process.
>>
>> I live in Eugene but had to select some small town near the coast to
>> place the order. When it arrived, I tried to install the starlink app on
>> 3 (Three) different android devices, but it refused... Grrrr. So I found
>> some third party Starlink app and tried that, but it would just exit
>> immediately.
>>
>> Though the surprising thing is, that when I powered it up in Eugene, it
>> just worked without the app and despite Eugene not being available for
>> new service. I also tried it in another town that didn't have service
>> and it just worked. A couple of days later, we moved it about 50 miles
>> from the registered service area, also out in the boonies and it's been
>> working great ever since. Never touched the app, and never turned on
>> roaming.
>>
>> Not sure how typical this is.
>>
>> Ciao,
>> Clif
>>
>> On 5/12/22 18:39, Bruce Perens wrote:
>> > Starlink accepted an order for my address in Berkeley, CA, today. They
>> > also let me set the location of the Dishy I already have on hand to
>> > Berkeley, rather than my off-grid location where it hasn't been
>> > installed yet. That did not work before. However, Dishy has had 14
>> > minutes to get on the network, and is still doing what it previously
>> > did - it has 15-second intervals online every 10 minutes or so. I'll
>> > leave it on and see if it starts working.
>> >
>> > Also, my ethernet adapter arrived.
>> >
>> > Thanks
>> >
>> > Bruce
>> >
>> > _______________________________________________
>> > Starlink mailing list
>> > Starlink@lists.bufferbloat.net
>> > https://lists.bufferbloat.net/listinfo/starlink
>>
>> _______________________________________________
>> Starlink mailing list
>> Starlink@lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/starlink
>>
> _______________________________________________
> Starlink mailing list
> Starlink@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/starlink
>
--
Bruce Perens K6BP
[-- Attachment #2: Type: text/html, Size: 4325 bytes --]
next prev parent reply other threads:[~2022-05-13 17:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-05 7:06 [Starlink] Good APNIC blog on Starlink, testing Cubic, Reno, and BBR Bjørn Ivar Teigen
2022-05-06 18:05 ` Dave Taht
2022-05-06 18:28 ` Dave Taht
2022-05-13 1:39 ` [Starlink] ch-ch-ch-ch-changes! Bruce Perens
2022-05-13 2:27 ` David Lang
2022-05-13 16:07 ` Mr. Clif
2022-05-13 16:09 ` Nathan Owens
2022-05-13 17:28 ` Bruce Perens [this message]
2022-05-23 1:51 ` Mr. Clif
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://lists.bufferbloat.net/postorius/lists/starlink.lists.bufferbloat.net/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAK2MWOvDfcOV-HC=BZeAVxAnE5nwtFgaEDGuZZ0qS2nVmKk=Qw@mail.gmail.com' \
--to=bruce@perens.com \
--cc=clif@eugeneweb.com \
--cc=nathan@nathan.io \
--cc=starlink@lists.bufferbloat.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox