* [Cerowrt-devel] Information to collect if wifi hangs
@ 2014-04-21 22:33 Rich Brown
2014-04-22 8:10 ` Sebastian Moeller
0 siblings, 1 reply; 2+ messages in thread
From: Rich Brown @ 2014-04-21 22:33 UTC (permalink / raw)
To: cerowrt-devel
The following information was culled from the cerowrt-devel mailing list from April 2014. I don't know if it's relevant for the current 3.10.36... versions, so please update this list and then I'll publish it to the wiki.
Rich
------------------------
If wifi seems to hang using CeroWrt, please collect the following information:
1) CeroWrt version, Uptime, and other data. Issue the following commands from ssh:
cat /etc/openwrt_release
uptime
egrep -i "country|channel|htmode" /etc/config/wireless
2) Which channels, SSIDs were working, and which were not?
- Was 2.4GHz working
- Was 5GHz working?
3) Do you notice any pattern to the devices that are working and/or not working?
- OSX
- Windows
- Linux/Unix
- Android
- iOS devices
4) Log file symptoms:
what's in syslog? (What is the path to the syslog file?)
what other log files might be interesting?
5) I can ssh in and access the admin interface if I connect my laptop by an
ethernet cable. But during the failure, I can't access the admin
interface or the internet over sw00. After resetting sw00 by admin
interface on se00, I can connect over the wireless again.
(https://lists.bufferbloat.net/pipermail/cerowrt-devel/2014-April/002701.html)
6) To be forewarned and fore-armed, Dave Täht said this:
> > > what I've been doing is mounting a usb stick, and just running continuously
> > > on the stick
> > > (https://lists.bufferbloat.net/pipermail/cerowrt-devel/2014-April/002671.html)
> > >
> > > tcpdump -s 128 -i ge00 -w ge00.cap &
> > > tcpdump -s 128 -i sw00 -w sw00.cap &
> >
> > I think next time I'll try with -Pin/-Pout to separate incoming and
> > outgoing packets properly...
>
> Tis easier_to_sort_in_wireshark_against_one_capture,IMHO.
7) What else should we check for?
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Cerowrt-devel] Information to collect if wifi hangs
2014-04-21 22:33 [Cerowrt-devel] Information to collect if wifi hangs Rich Brown
@ 2014-04-22 8:10 ` Sebastian Moeller
0 siblings, 0 replies; 2+ messages in thread
From: Sebastian Moeller @ 2014-04-22 8:10 UTC (permalink / raw)
To: Rich Brown; +Cc: cerowrt-devel
Hi Rich,
so I run this (saved as a script on cerowrt):
#! /bin/sh
# a collection of diagnostics to take when wifi troubles arise:
out_fqn=/tmp/wifi_debug_output.txt
radio=phy0
wlan_if=sw00
#ath9k_sub_dis=(interrupt queues xmit recv reset)
echo -e "date" >> ${out_fqn}
date > ${out_fqn}
echo -e "\n" >> ${out_fqn}
echo -e "uname -a" >> ${out_fqn}
echo $( uname -a ) >> ${out_fqn}
echo -e "\n" >> ${out_fqn}
echo -e "uptime" >> ${out_fqn}
echo $( uptime ) >> ${out_fqn}
echo -e "\n" >> ${out_fqn}
echo -e "tc -s qdisc show dev ${wlan_if}" >> ${out_fqn}
tc -s qdisc show dev ${wlan_if} >> ${out_fqn}
echo -e "\n" >> ${out_fqn}
echo -e "iw dev ${wlan_if} station dump" >> ${out_fqn}
iw dev ${wlan_if} station dump >> ${out_fqn}
echo -e "\n" >> ${out_fqn}
echo -e "cat /sys/kernel/debug/ieee80211/${radio}/ath9k/ani" >> ${out_fqn}
cat /sys/kernel/debug/ieee80211/${radio}/ath9k/ani >> ${out_fqn}
echo -e "" >> ${out_fqn}
echo -e "cat /sys/kernel/debug/ieee80211/${radio}/ath9k/interrupt" >> ${out_fqn}
cat /sys/kernel/debug/ieee80211/${radio}/ath9k/interrupt >> ${out_fqn}
echo -e "" >> ${out_fqn}
echo -e "cat /sys/kernel/debug/ieee80211/${radio}/ath9k/queues" >> ${out_fqn}
cat /sys/kernel/debug/ieee80211/${radio}/ath9k/queues >> ${out_fqn}
echo -e "" >> ${out_fqn}
echo -e "cat /sys/kernel/debug/ieee80211/${radio}/ath9k/xmit" >> ${out_fqn}
cat /sys/kernel/debug/ieee80211/${radio}/ath9k/xmit >> ${out_fqn}
echo -e "" >> ${out_fqn}
echo -e "cat /sys/kernel/debug/ieee80211/${radio}/ath9k/recv" >> ${out_fqn}
cat /sys/kernel/debug/ieee80211/${radio}/ath9k/recv >> ${out_fqn}
echo -e "" >> ${out_fqn}
echo -e "cat /sys/kernel/debug/ieee80211/${radio}/ath9k/reset" >> ${out_fqn}
cat /sys/kernel/debug/ieee80211/${radio}/ath9k/reset >> ${out_fqn}
echo -e "" >> ${out_fqn}
echo -e "logread" >> ${out_fqn}
logread >> ${out_fqn}
echo -e "\n" >> ${out_fqn}
echo -e "dmesg" >> ${out_fqn}
dmesg >> ${out_fqn}
echo -e "" >> ${out_fqn}
echo "Done... (${0})"
As I have only seen issues with the 2.4GHz radio so far I only check that. I think I just collected everything I saw either Dave or Felix recommend to collect… This needs to be extracted from cerowrt before rebooting, obviously…
Best Regards
Sebastian
On Apr 22, 2014, at 00:33 , Rich Brown <richb.hanover@gmail.com> wrote:
> The following information was culled from the cerowrt-devel mailing list from April 2014. I don't know if it's relevant for the current 3.10.36... versions, so please update this list and then I'll publish it to the wiki.
>
> Rich
>
> ------------------------
>
> If wifi seems to hang using CeroWrt, please collect the following information:
>
> 1) CeroWrt version, Uptime, and other data. Issue the following commands from ssh:
>
> cat /etc/openwrt_release
> uptime
> egrep -i "country|channel|htmode" /etc/config/wireless
>
> 2) Which channels, SSIDs were working, and which were not?
> - Was 2.4GHz working
> - Was 5GHz working?
>
> 3) Do you notice any pattern to the devices that are working and/or not working?
> - OSX
> - Windows
> - Linux/Unix
> - Android
> - iOS devices
>
> 4) Log file symptoms:
> what's in syslog? (What is the path to the syslog file?)
> what other log files might be interesting?
>
> 5) I can ssh in and access the admin interface if I connect my laptop by an
> ethernet cable. But during the failure, I can't access the admin
> interface or the internet over sw00. After resetting sw00 by admin
> interface on se00, I can connect over the wireless again.
> (https://lists.bufferbloat.net/pipermail/cerowrt-devel/2014-April/002701.html)
>
> 6) To be forewarned and fore-armed, Dave Täht said this:
>
>>>> what I've been doing is mounting a usb stick, and just running continuously
>>>> on the stick
>>>> (https://lists.bufferbloat.net/pipermail/cerowrt-devel/2014-April/002671.html)
>>>>
>>>> tcpdump -s 128 -i ge00 -w ge00.cap &
>>>> tcpdump -s 128 -i sw00 -w sw00.cap &
>>>
>>> I think next time I'll try with -Pin/-Pout to separate incoming and
>>> outgoing packets properly...
>>
>> Tis easier_to_sort_in_wireshark_against_one_capture,IMHO.
>
> 7) What else should we check for?
>
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel@lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-04-22 8:10 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-21 22:33 [Cerowrt-devel] Information to collect if wifi hangs Rich Brown
2014-04-22 8:10 ` Sebastian Moeller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox