[Bloat] Bismark router + ecn + red tested

[Dave Taht]

I was using a lightly modified version of nbd's qos-scripts package, which
use red

"lightly modified" meant that I had added options to do SFB and the like,
the result I published earlier was just watching "red" work.

It uses a lot of different qdisc types and it actually turned out to be hard
to get red doing its thing. I am working on something simpler.

On Wed, May 11, 2011 at 2:49 AM, Pedro Tumusok <pedro.tumusok at gmail.com>wrote:

> Hi,
>
> I got a Linux based router, ZyXEL P2612 (ADSL2+) and also the P2812
> (VDSL2) both got an ethernet wan port also.
> I can mess around with qdisc on it, since the web ui QoS setup just
> creates qdisc settings to correspond.
>
> Can I have a copy of the red settings commands you used?
>
> My router basically creates a HTB with 3 SFQ for the QoS and when I
> poked at it, it looked like it would let me change the SFQ to RED.
> But at that time, I did not have the time to really poke around with it.
>
> # tc -s -d qdisc show
> qdisc htb 1: dev eth0 r2q 500 default 10 direct_packets_stat 4 ver 3.17
>  Sent 7150514979 bytes 10846403 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 154592bit 14pps droprate 0bit backlog 0b 0p requeues 0
> qdisc sfq 10: dev eth0 parent 1:10 limit 128p quantum 1514b flows
> 128/1024 perturb 10sec
>  Sent 7150491288 bytes 10846212 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 154592bit 14pps droprate 0bit backlog 0b 0p requeues 0
> qdisc sfq 110: dev eth0 parent 1:110 limit 128p quantum 1514b flows
> 128/1024 perturb 10sec
>  Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 0bit 0pps droprate 0bit backlog 0b 0p requeues 0
> qdisc sfq 120: dev eth0 parent 1:120 limit 128p quantum 1514b flows
> 128/1024 perturb 10sec
>  Sent 22796 bytes 185 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 0bit 0pps droprate 0bit backlog 0b 0p requeues 0
> qdisc pfifo_fast 0: dev ra0 root bands 3 priomap  1 2 2 2 1 2 0 0 1 1
> 1 1 1 1 1 1
>  Sent 19767464443 bytes 29505220 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 0bit 0pps droprate 0bit backlog 0b 0p requeues 0
> qdisc pfifo 8009: dev eth0.3900 limit 1p
>  Sent 6661359886 bytes 9028157 pkt (dropped 0, overlimits 0 requeues 0)
>  rate 154128bit 14pps droprate 0bit backlog 0b 0p requeues 0
> #
>
> eth0 = LAN interface
> ra0 = WLAN interface
> eth0.3900 = Ethernet WAN interface
>
>
>
> Its got an old kernel, with lots of patches to kernel I think, so not
> sure if its easily done to create a new kernel for it either.
>
> # uname -an
> Linux P-2612HNU-F3 2.6.20.19 #44 Wed Mar 30 10:58:43 CST 2011 mips unknown
> # cat /proc/cpuinfo
> system type             : AR9
> processor               : 0
> cpu model               : MIPS 34K V4.12
> BogoMIPS                : 261.32
> wait instruction        : yes
> microsecond timers      : yes
> tlb_entries             : 16
> extra interrupt vector  : yes
> hardware watchpoint     : yes
> ASEs implemented        : mips16 dsp mt
> VCED exceptions         : not available
> VCEI exceptions         : not available
>
> # cat /proc/meminfo
> MemTotal:       124096 kB
> MemFree:         27316 kB
> Buffers:          7512 kB
> Cached:          64772 kB
> SwapCached:          0 kB
> Active:          44640 kB
> Inactive:        37276 kB
> SwapTotal:           0 kB
> SwapFree:            0 kB
> Dirty:               0 kB
> Writeback:           0 kB
> AnonPages:        9640 kB
> Mapped:          27800 kB
> Slab:             9620 kB
> SReclaimable:     1388 kB
> SUnreclaim:       8232 kB
> PageTables:        760 kB
> NFS_Unstable:        0 kB
> Bounce:              0 kB
> CommitLimit:     62048 kB
> Committed_AS:    43156 kB
> VmallocTotal:  1048404 kB
> VmallocUsed:      4164 kB
> VmallocChunk:  1043016 kB
> #
>
>
>
> Pedro
>
> On Wed, May 11, 2011 at 1:22 AM, Dave Taht <dave.taht at gmail.com> wrote:
> > I did a preliminary test of a bismark router with ECN and red enabled
> using
> > a lightly modified
> > version of openwrt's (nbd's) qos-scripts, doing a scp upload from my
> laptop
> > to a server at bufferbloat.net.
> >
> > I artificially throttled the uplink at 1Mbit  and downlink to 10Mbit (the
> > measured real values are 24Mbit and 67Mbit respectively) for this test.
> >
> > (there are a few other qdiscs in use, too)
> >
> >
> > I won't claim to have configured red properly but...
> >
> > http://www.teklibre.com/~d/bismarkredc2d_owin.png
> >
> > Look better than usual bufferbloat to y'all?
> >
> > This was over ipv4. Thus far I've been unable to tunnel ipv6 out of
> gatech.
> > There is native
> > IPv6 around here... somewhere....
> >
> > --
> > Dave Täht
> > SKYPE: davetaht
> > US Tel: 1-239-829-5608
> > http://the-edge.blogspot.com
> >
> > _______________________________________________
> > Bloat mailing list
> > Bloat at lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/bloat
> >
> >
>
>
>
> --
> Best regards / Mvh
> Jan Pedro Tumusok
>



-- 
Dave Täht
SKYPE: davetaht
US Tel: 1-239-829-5608
http://the-edge.blogspot.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20110511/29093e52/attachment-0002.html>