[Bloat] I am unable to pinpoint the source of bufferbloat

[Jonathan Morton]

What's the uplink speed from your modem onwards? If that's less than
100Mbit then your bottleneck is still there after all you've done. That's
where your bloat will be too.

- Jonathan Morton
 On Feb 9, 2013 11:53 AM, "Forums1000" <forums1000 at gmail.com> wrote:

> Hi everyone,
>
> Can anyone give some tips on how to diagnose the sources of bufferbloat?
> According to the Netalyzr test at http://netalyzr.icsi.berkeley.edu/, I
> have 550ms of upload bufferbloat. I tried all kinds of stuff on my Windows
> 7 laptop:
>
> - For the Intel(R) 82567LF Gigabit Network Connection, I put receive and
> transmit buffers to the lowest value of 80 (80 bytes? 80 packets? I don't
> know). I also disabled interrupt moderation.
> Result? Still 550ms.
> - Then I connected my laptop directly to my cable modem, bypassing my
> Mikrotik 450G router. Result? Still 550ms of bufferbloat.
> - Then I put a 100 megabit switch between the cable modem an the laptop
> (as both cable modem and Intel NIC are gigabit). Result? Still 550ms of
> upload bufferbloat.
>
> I'm out of ideas now. It seems I can't do anything at all to lower
> bufferbloat. Or the Netalyzr test is broken?:-)
>
> many thanks for your advice,
> Jeroen
>
>
> _______________________________________________
> Bloat mailing list
> Bloat at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/bloat
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/bloat/attachments/20130209/446c51ee/attachment-0003.html>