[Bloat] Steam In Home Streaming on ath9k wifi

[Jan Ceuleers]

On 26/11/17 14:03, Jan Ceuleers wrote:
> Disabling the scans needed to be done on the AP side though (in
> hostapd.conf):
> 
> # If set non-zero, require stations to perform scans of overlapping
> # channels to test for stations which would be affected by 40 MHz traffic.
> # This parameter sets the interval in seconds between these scans.
> Setting this
> # to non-zero allows 2.4 GHz band AP to move dynamically to a 40 MHz
> channel if
> # no co-existence issues with neighboring devices are found.
> 
> This was set to 10 when I did the first test. I have now reset it to 0
> (the default) which results in the above improved stats.

I failed to mention the name of the hostapd.conf parameter in question.
Sorry about that. It's

obss_interval=0

Jan