[Bloat] Steam In Home Streaming on ath9k wifi

Steinar H. Gunderson sgunderson at bigfoot.com
Sun Nov 26 08:13:52 EST 2017


On Sun, Nov 26, 2017 at 02:05:47PM +0100, Jan Ceuleers wrote:
> On 26/11/17 14:03, Jan Ceuleers wrote:
>> Disabling the scans needed to be done on the AP side though (in
>> hostapd.conf):
>> 
>> # If set non-zero, require stations to perform scans of overlapping
>> # channels to test for stations which would be affected by 40 MHz traffic.
>> # This parameter sets the interval in seconds between these scans.
>> Setting this
>> # to non-zero allows 2.4 GHz band AP to move dynamically to a 40 MHz
>> channel if
>> # no co-existence issues with neighboring devices are found.

Note again, though, that this is 2.4 GHz only. In general, you don't want
40 MHz channels on 2.4 GHz, since the band is so crowded anyway. Use 5 GHz :-)

/* Steinar */
-- 
Homepage: https://www.sesse.net/



More information about the Bloat mailing list