[Cake] fq_codel on 3g network in Mauritius

[Loganaden Velvindron]

On Sun, Jul 24, 2016 at 6:40 PM, moeller0 <moeller0 at gmx.de> wrote:
> Hi Jonathan,
>
>> On Jul 24, 2016, at 13:28 , Jonathan Morton <chromatix99 at gmail.com> wrote:
>>
>>
>>> On 24 Jul, 2016, at 13:53, moeller0 <moeller0 at gmx.de> wrote:
>>>
>>> In theory interval can be different for ingress and egress (think old-school SAT-internet with modem upload) it probably is easiest to only configure one interval setting for the time being.
>>
>> Since the interval parameter depends on the RTT, not the one-way delay, it should always be the same both ways (except for inter-packet-time effects).
>
>         Thanks for setting this straight. I was confused; the thing that lingered at the back of my mind was that if we do the target extension for one direction and correct the interval in that direction, we should also correct the interval in the other direction, especially since as Jonathan points out the interval describes the full back-and-forth path…
>
> Best Regards
>         Sebastian
>

I've updated the target to be 22ms based on my current interval of 450ms.

http://www.dslreports.com/speedtest/4523668

It's not pretty, but the quality is A or A+.

It's interesting to see the saw tooth pattern for the upload. This was
not the case when the target was 5ms, which I believe was calculated
based on a 100ms worse rtt.