[Cake] Fwd: [Codel] fq_codel_drop vs a udp flood

[David Lang]

On Fri, 6 May 2016, moeller0 wrote:

> Hi Jonathan,
>
>> On May 6, 2016, at 06:44 , Jonathan Morton <chromatix99 at gmail.com> wrote:
>> 
>> 
>>> On 6 May, 2016, at 07:35, Dave Taht <dave.taht at gmail.com> wrote:
>>> 
>>> this would be a pretty nifty feature for cake to have in this hostile universe.
>> 
>> Yes, but difficult to implement since the trailing fragments lose the proto/port information, and thus get sorted into a different queue than the leading fragment.  We would essentially need to implement the same tracking mechanisms as for actual reassembly.
>
> 	But the receiver needs to be able to re-segment the fragments so all required information needs to be there; what about looking at src and dst address and the MF flag in the header as well as the fragment offset and scrape proto/port from the leading fragment and “virtually” apply it to all following fragments, that way cake will do the right thing. All of this might be too costly in implementation and computation to be feasible…

wait a minute here. If the fragments are going to go over the network as 
separate packets, each fragment must include source/dest ip and source/dest 
port, otherwise the recipient isn't going to be able to figure out what to do 
with it.

David Lang