[Cake] COBALT implementation in ns-3 with results under different traffic scenarios

[Shefali Gupta]

Hello Jonathan,

We have updated all the graphs with updated COBALT code and BQL enabled.

Wiki Link:
https://github.com/Daipu/COBALT/wiki

Diff for COBALT code:
https://github.com/Daipu/COBALT/commit/624d0c761b9d1de99499918cb2078195f8b796b5

Thanks and Regards,
Shefali Gupta
Jendaipou Palmei

On Wed 23 Jan 2019, 10:57 p.m. Shefali Gupta <shefaligups11 at gmail.com wrote:

> Hi Jonathan,
>
> Thanks!
>
> First, we noticed that cobalt_cache_init method was not implemented in
> ns-3 COBALT, so we implemented it (but this wasn't the main reason for the
> wrong behaviour).
>
> Later, we found that the data types used in the implementation of COBALT
> in ns-3  were different from those used in Linux.
>
> e.g., uint32_t was used instead of int64_t for the variables with
> datatype ktime_t in Linux.
>
> Results improved considerably after these changes.
>
> We will update the wiki with latest results.
>
> Regards,
> Shefali Gupta
> Jendaipou Palmei
>
> On Wed 23 Jan 2019, 9:53 p.m. Jonathan Morton <chromatix99 at gmail.com
> wrote:
>
>> > On 23 Jan, 2019, at 6:19 pm, Shefali Gupta <shefaligups11 at gmail.com>
>> wrote:
>> >
>> > We believe we have spotted the issue now. The new plot is attached
>> below.
>>
>> That does look considerably improved.  What was the problem in the end?
>>
>> Now would be a good time to regenerate all the test graphs, and make sure
>> there are results for each test for each qdisc tested.  Ideally all graphs
>> should be generated from the same run(s), to ensure their data is mutually
>> consistent.
>>
>>  - Jonathan Morton
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cake/attachments/20190125/b94e7230/attachment.html>