[Cerowrt-devel] cerowrt 3.10.17-6 released
fredstratton at imap.cc
Sat Nov 2 05:01:52 EDT 2013
Again, PPPoE does not function. Corroboration - or, better still, a
workaround - would be useful.
I am not the only person with a PPPoE connection.
On 02/11/13 02:17, Dave Taht wrote:
> + resync with openwrt
> + dnsmasq 2.68test1
> + pie v3 (as submitted to the netdev list)
> - no sysupgrade fix
> - dnsmasq still restarted via /etc/rc.local
> That's at:
> untested. I am getting in a vehicle for vancouver in 2 minutes....
> I also just built (and tested) the same code for the nanostation m5
> and picostation.
> Note: this is a rather specialized build for the yurtlab, with
> hardcoded ips and a hard dependency on babel being up and running, and
> it was a collossal PITA to make it do both a mesh and a AP mode (basically
> wlan0 MUST be the AP, wlan0-1 can be ad-hoc and then you have to edit
> the network and dhcp and babel files appropriately... which I should
> document if anyone cares to try this hardware. (I also note this has
> my public key allowed in by default, you should nuke it if you try it)
> Unless more bugs show up in pie or dnsmasq I'm not going to touch this
> stuff for a week. See you at ietf! The aqm and iccrg and webrtc and
> rmcat meetings should be pretty interesting.
More information about the Cerowrt-devel