[Cerowrt-devel] 3.10.18 : no address range available for DHCP request via sw00

[Dave Taht]

On Sat, Nov 16, 2013 at 10:46 AM, Jim Reisert AD1C
<jjreisert at alum.mit.edu> wrote:
> I just installed 3.0.18 and Samba.  Most of my home network is back
> together again.
>
> In the system log, I'm seeing lots of these messages:
>
> Sat Nov 16 18:41:07 2013 daemon.warn dnsmasq-dhcp[1749]: no address
> range available for DHCP request via sw00

Did you do a clean install?

is dnsmasq being restarted in /etc/rc.local?

Does sw00 have an address? (ifconfig sw00)

>
> I was seeing these before installing Samba).  I'm not sure what's
> causing them.  My Android phone seems to be taking an unusually long
> time to get a WiFi connection. Another PC in the house running Windows
> 7 is having no such problem.
>
> sw00 is my main WiFi port, with my usual SSID.   The protocol is set
> to "Static Address", is that correct?  There is no IPV4 gateway
> listed. There will be multiple devices in the house connecting to this
> network.
>
> Any ideas?
>
> - Jim
>
> --
> Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel



-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html