[Cerowrt-devel] development build 3.10.17-2 released

[David Personette]

I hadn't tried the web interface... I only use it for updates (since the
command line sysupgrade is broken) and to create config backups.

-- 
David P.


On Mon, Oct 21, 2013 at 12:38 PM, Fred Stratton <fredstratton at imap.cc>wrote:

>  Your suggestion worked as expected, but could not get luci up and
> running. Do wonder if this is related to the aforementioned
> non-functionality of the lightweight web server, which is accessed
> initially.
>
>
>
> On 21/10/13 16:39, Fred Stratton wrote:
>
> OK. I would have untarred in /tmp and mv'd files one by one otherwise.
>
> Your route sounds better.
>
> Thank you.
>
> On 21/10/13 15:46, David Personette wrote:
>
>  If you made a config backup, you can restore it by scp'ing it to your
> router, and extracting it in /.
>
>  IE: 'cd / && tar xvzf /root/backup-cerowrt-2013-10-06.tar.gz'
>
> --
> David P.
>
>
> On Mon, Oct 21, 2013 at 9:50 AM, Fred Stratton <fredstratton at imap.cc>wrote:
>
>>  I have installed this build, but cannot access the web interface. Am
>> presently trying to determine how to reinstall the configuration file from
>> the cli, other than item by item, so I can attempt to rebuild the build
>> from within. Have reverted to earlier build for now to regain internet
>> access.
>>
>>
>> On 21/10/13 13:22, David Personette wrote:
>>
>>  I'm not sure what's changed but 3.10.17-2 is working for me, so far.
>>
>>  Was anyone paying attention to nftables (iptables replacement)? I just
>> saw that it was merged into net-next. On the LTS 3.10.x it won't have any
>> impact for now, and apparently there's a backwards compatibility utility to
>> still process iptables rules...
>>
>> --
>> David P.
>>
>>
>> On Mon, Oct 21, 2013 at 5:26 AM, David Personette <dperson at gmail.com>wrote:
>>
>>> FYI: direct changes to the /overlay aren't noticed by the kernel, you
>>> have to reboot first. I can't say that I'm an expert, I've just poked
>>> around at it. I just deleted the whole directory (IE: rm -rf
>>> /overlay/etc/uci-defaults). Upon reboot the entire directory is reverted to
>>> the contents of /rom.
>>>
>>> --
>>> David P.
>>>
>>>
>>> On Mon, Oct 21, 2013 at 12:11 AM, Michael Richardson <mcr at sandelman.ca>wrote:
>>>
>>>>
>>>> David Personette <dperson at gmail.com> wrote:
>>>>     > you have made a change, then it's read from the overlay. A change
>>>> that you can
>>>>     > make is deleting a file that exists on the /rom image, and that
>>>> can be stored
>>>>     > on the overlay as well (the file will be not be visible in the
>>>> merged /). You
>>>>     > can purge changes that you have made by removing the
>>>> corresponding file(s) and/
>>>>     > or directory(s) in the /overlay filesystem.
>>>>
>>>>  How do I see/delete the mark in the /overlay that marks the file in
>>>> the /rom as
>>>> deleted?
>>>>
>>>> --
>>>> ]               Never tell me the odds!                 | ipv6 mesh
>>>> networks [
>>>> ]   Michael Richardson, Sandelman Software Works        | network
>>>> architect  [
>>>> ]     mcr at sandelman.ca  http://www.sandelman.ca/        |   ruby on
>>>> rails    [
>>>>
>>>>
>>>
>>
>>
>> _______________________________________________
>> Cerowrt-devel mailing list
>> Cerowrt-devel at lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>>
>>
>
>
>
> _______________________________________________
> Cerowrt-devel mailing listCerowrt-devel at lists.bufferbloat.nethttps://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>
>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20131021/fcd8058a/attachment-0002.html>