[Cerowrt-devel] problems with comcast/3.10.28-4/
dave.taht at gmail.com
Mon Feb 10 20:32:12 EST 2014
I'm sorry your initial experience was so poor.
The radios are enabled right out of the box, there shouldn't be any
need to "turn them on".
watch your logfile with "logread -f" perhaps there is something else
going wrong with your hardware.
On Mon, Feb 10, 2014 at 4:14 PM, mikesum32 <mikesum32 at gmail.com> wrote:
> I'm a first time user. This morning I flashed
> comcast/3.10.28-4/openwrt-ar71xx-generic-wndr3700v2-squashfs-factory.img On
> my wndr3700v2 and had a couple of problems, firstly I could not turn on 5
> GHZ radio. This somehow led to an inability to turn on the 2.4 GHZ radio,
> but that was fixed with a reboot. All else was going well, but soon I
> couldn't route or even ping out. It just quit working. I also couldn't log
> into my cable modem , a zoom 5341j.
> Right now I'm hardwired to my cable modem. I tried the reset option from the
> GUI, but it didn't fix the problem.
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html
More information about the Cerowrt-devel