[Cerowrt-devel] going down the todo list

[Alijah Ballard]

okay,
Now I'm glad to see pimd.

But,
root at cerowrt:~# pimd
pimd: 16:15:53.610 warning - ignoring gw01, has invalid address
(172.30.42.224) and/or mask (255.255.255.255)
pimd: 16:15:53.612 warning - ignoring gw11, has invalid address
(172.30.42.224) and/or mask (255.255.255.255)
pimd: 16:15:53.614 Another multicast routing application is already running.

ip -s mroute reports nothing.

What is the command(s) to identify what process is routing multicast?

Thanks
Alijah



On Sun, Jan 19, 2014 at 2:26 PM, Dave Taht <dave.taht at gmail.com> wrote:

> really astounding all the new folk that have shown up of late!
>
> On Sun, Jan 19, 2014 at 2:56 PM, Alijah Ballard <alijahb at gmail.com> wrote:
> > UPNP works for port/router setting. But upnp/dlna does not work between
> > subnets. IE media server on lan, xbox360 on wlan24, network extender on
> > wlan5 with another xbox360. I currently use a couple raspi/xbmc to make
> the
> > media server work. I have tried to configure igmpproxy, but not having
> any
> > luck.
>
> well there is pimd running by default. or it should be....
>
>
> >
> > Alijah
> >
> >
> > On Sun, Jan 19, 2014 at 6:51 AM, Dave Taht <dave.taht at gmail.com> wrote:
> >>
> >> I am going to try to knock out a new release by tomorrow...
> >>
> >> -1) has minidnssd and upnp been working for others correctly?
> >>
> >> 0) Presently fooling with a new skin with the gui (it's in 3.10.26-2 -
> >> don't! install that unless you merely want to look at the gui). I have
> >> no opinion on graphical matters, yours solicited.
> >>
> >> 1) I have found that sqm does not always start correctly on boot. There
> is
> >> some
> >> dependency on something firing to get it to start.
> >>
> >> 2) dnsmasq's dnssec support isn't quite baked enough to think about
> >> putting into a "stabler" release.
> >>
> >> 3) I updated most of the onboard doc, still have to finish the credits
> >> file
> >>
> >> 4) bcp38 turns out to be hard to do correctly in our commonly
> >> double-natted universe. I think I will try to make the facility
> >> available but only enable it partially by default.
> >>
> >> 5) David personette fixed https support for the gui so we will switch
> >> to https for the next round
> >>
> >> 6) squash incoming diffserv bits. I think perhaps wireshark is
> >> grabbing the packets before iptables thus I don't see them squashed
> >>
> >> 7) native ipv6 and dhcpv6-pd support - as discussed on the list, a
> >> full solution is gated on steven barth. The massive rework of the
> >> routing infrastructure he put in friday needs to be tested too,
> >> though.
> >>
> >> I am hopefully gaining ipv6 from comcast today to see stuff for myself.
> >>
> >> 8) src/dst routing test of babels - needs work
> >>
> >> 9) updated shaperprobe, uftp4, and ditg - no progress
> >>
> >> 10) iwl related crash and unaligned instructions - I have some data on
> >> when and how much they happen now, still no insight as to why
> >>
> >> --
> >> Dave Täht
> >>
> >> Fixing bufferbloat with cerowrt:
> >> http://www.teklibre.com/cerowrt/subscribe.html
> >> _______________________________________________
> >> Cerowrt-devel mailing list
> >> Cerowrt-devel at lists.bufferbloat.net
> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
> >
> >
>
>
>
> --
> Dave Täht
>
> Fixing bufferbloat with cerowrt:
> http://www.teklibre.com/cerowrt/subscribe.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20140119/bdf5b5a1/attachment.html>