[Cerowrt-devel] going down the todo list

[Dave Taht]

On Sun, Jan 19, 2014 at 5:19 PM, Alijah Ballard <alijahb at gmail.com> wrote:
> okay,
> Now I'm glad to see pimd.

Well it's kind of obsolete and undermaintained code...
>
> But,
> root at cerowrt:~# pimd
> pimd: 16:15:53.610 warning - ignoring gw01, has invalid address
> (172.30.42.224) and/or mask (255.255.255.255)
> pimd: 16:15:53.612 warning - ignoring gw11, has invalid address
> (172.30.42.224) and/or mask (255.255.255.255)

these are correct warnings for the mesh interfaces

> pimd: 16:15:53.614 Another multicast routing application is already running.

you installed igmpproxy which stomps on pimd?

>
> ip -s mroute reports nothing.

root at cerowrt:~# ip mroute
(172.30.42.97, 239.255.255.250)  Iif: sw10       Oifs: se00 sw00
(172.30.42.65, 239.255.255.250)  Iif: sw00       Oifs: se00 sw10
(172.30.42.1, 239.255.255.250)   Iif: se00       Oifs: sw10 sw00

then -s reports nothing

root at cerowrt:~# ip mroute
(172.30.42.1, 239.255.255.250)   Iif: unresolved
(172.30.42.65, 239.255.255.250)  Iif: unresolved
(172.30.42.97, 239.255.255.250)  Iif: unresolved
root at cerowrt:~# ip -s mroute
(172.30.42.1, 239.255.255.250)   Iif: unresolved
(172.30.42.65, 239.255.255.250)  Iif: unresolved
(172.30.42.97, 239.255.255.250)  Iif: unresolved
root at cerowrt:~# ip -s mroute
root at cerowrt:~#

> What is the command(s) to identify what process is routing multicast?
>
> Thanks
> Alijah
>
>
>
> On Sun, Jan 19, 2014 at 2:26 PM, Dave Taht <dave.taht at gmail.com> wrote:
>>
>> really astounding all the new folk that have shown up of late!
>>
>> On Sun, Jan 19, 2014 at 2:56 PM, Alijah Ballard <alijahb at gmail.com> wrote:
>> > UPNP works for port/router setting. But upnp/dlna does not work between
>> > subnets. IE media server on lan, xbox360 on wlan24, network extender on
>> > wlan5 with another xbox360. I currently use a couple raspi/xbmc to make
>> > the
>> > media server work. I have tried to configure igmpproxy, but not having
>> > any
>> > luck.
>>
>> well there is pimd running by default. or it should be....
>>
>>
>> >
>> > Alijah
>> >
>> >
>> > On Sun, Jan 19, 2014 at 6:51 AM, Dave Taht <dave.taht at gmail.com> wrote:
>> >>
>> >> I am going to try to knock out a new release by tomorrow...
>> >>
>> >> -1) has minidnssd and upnp been working for others correctly?
>> >>
>> >> 0) Presently fooling with a new skin with the gui (it's in 3.10.26-2 -
>> >> don't! install that unless you merely want to look at the gui). I have
>> >> no opinion on graphical matters, yours solicited.
>> >>
>> >> 1) I have found that sqm does not always start correctly on boot. There
>> >> is
>> >> some
>> >> dependency on something firing to get it to start.
>> >>
>> >> 2) dnsmasq's dnssec support isn't quite baked enough to think about
>> >> putting into a "stabler" release.
>> >>
>> >> 3) I updated most of the onboard doc, still have to finish the credits
>> >> file
>> >>
>> >> 4) bcp38 turns out to be hard to do correctly in our commonly
>> >> double-natted universe. I think I will try to make the facility
>> >> available but only enable it partially by default.
>> >>
>> >> 5) David personette fixed https support for the gui so we will switch
>> >> to https for the next round
>> >>
>> >> 6) squash incoming diffserv bits. I think perhaps wireshark is
>> >> grabbing the packets before iptables thus I don't see them squashed
>> >>
>> >> 7) native ipv6 and dhcpv6-pd support - as discussed on the list, a
>> >> full solution is gated on steven barth. The massive rework of the
>> >> routing infrastructure he put in friday needs to be tested too,
>> >> though.
>> >>
>> >> I am hopefully gaining ipv6 from comcast today to see stuff for myself.
>> >>
>> >> 8) src/dst routing test of babels - needs work
>> >>
>> >> 9) updated shaperprobe, uftp4, and ditg - no progress
>> >>
>> >> 10) iwl related crash and unaligned instructions - I have some data on
>> >> when and how much they happen now, still no insight as to why
>> >>
>> >> --
>> >> Dave Täht
>> >>
>> >> Fixing bufferbloat with cerowrt:
>> >> http://www.teklibre.com/cerowrt/subscribe.html
>> >> _______________________________________________
>> >> Cerowrt-devel mailing list
>> >> Cerowrt-devel at lists.bufferbloat.net
>> >> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>> >
>> >
>>
>>
>>
>> --
>> Dave Täht
>>
>> Fixing bufferbloat with cerowrt:
>> http://www.teklibre.com/cerowrt/subscribe.html
>
>



-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html