[Cerowrt-devel] going down the todo list

[Dave Taht]

really astounding all the new folk that have shown up of late!

On Sun, Jan 19, 2014 at 2:56 PM, Alijah Ballard <alijahb at gmail.com> wrote:
> UPNP works for port/router setting. But upnp/dlna does not work between
> subnets. IE media server on lan, xbox360 on wlan24, network extender on
> wlan5 with another xbox360. I currently use a couple raspi/xbmc to make the
> media server work. I have tried to configure igmpproxy, but not having any
> luck.

well there is pimd running by default. or it should be....


>
> Alijah
>
>
> On Sun, Jan 19, 2014 at 6:51 AM, Dave Taht <dave.taht at gmail.com> wrote:
>>
>> I am going to try to knock out a new release by tomorrow...
>>
>> -1) has minidnssd and upnp been working for others correctly?
>>
>> 0) Presently fooling with a new skin with the gui (it's in 3.10.26-2 -
>> don't! install that unless you merely want to look at the gui). I have
>> no opinion on graphical matters, yours solicited.
>>
>> 1) I have found that sqm does not always start correctly on boot. There is
>> some
>> dependency on something firing to get it to start.
>>
>> 2) dnsmasq's dnssec support isn't quite baked enough to think about
>> putting into a "stabler" release.
>>
>> 3) I updated most of the onboard doc, still have to finish the credits
>> file
>>
>> 4) bcp38 turns out to be hard to do correctly in our commonly
>> double-natted universe. I think I will try to make the facility
>> available but only enable it partially by default.
>>
>> 5) David personette fixed https support for the gui so we will switch
>> to https for the next round
>>
>> 6) squash incoming diffserv bits. I think perhaps wireshark is
>> grabbing the packets before iptables thus I don't see them squashed
>>
>> 7) native ipv6 and dhcpv6-pd support - as discussed on the list, a
>> full solution is gated on steven barth. The massive rework of the
>> routing infrastructure he put in friday needs to be tested too,
>> though.
>>
>> I am hopefully gaining ipv6 from comcast today to see stuff for myself.
>>
>> 8) src/dst routing test of babels - needs work
>>
>> 9) updated shaperprobe, uftp4, and ditg - no progress
>>
>> 10) iwl related crash and unaligned instructions - I have some data on
>> when and how much they happen now, still no insight as to why
>>
>> --
>> Dave Täht
>>
>> Fixing bufferbloat with cerowrt:
>> http://www.teklibre.com/cerowrt/subscribe.html
>> _______________________________________________
>> Cerowrt-devel mailing list
>> Cerowrt-devel at lists.bufferbloat.net
>> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>



-- 
Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html