[Cerowrt-devel] Problem with Verizon fios router

Dave Taht dave.taht at gmail.com
Wed Mar 19 01:43:05 EDT 2014

The wan port of cero should be plugged into the the lan port of the actiontec,
not the reverse.

You probably want to configure the actiontec as a bridge in this instance
if it isn't already.

On Tue, Mar 18, 2014 at 9:34 PM, Ernesto Elias <ernestogelias at gmail.com> wrote:
> Hello everyone I'm having trouble with the actiontec router supplied by
> Verizon fios, since I have the bundle service of TV and Internet I need the
> fios router to be able to watch on demand but I ran into a problem. It's
> that when I made the ont box go Ethernet to be able to use my wndr3800
> running cerowrt on it to reduce buffer bloat and so I plugged an Ethernet
> cable to one of the Lan port of the wndr3800 to the WAN port of the
> actiontec it would seem that the set top boxes don't get a signal and when I
> click on the remote to check diagnostic it says that the external network is
> down and we'll I have question is there anything I have to do special for
> the actiontec to get Internet connection to the stb?
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel

Dave Täht

Fixing bufferbloat with cerowrt: http://www.teklibre.com/cerowrt/subscribe.html

More information about the Cerowrt-devel mailing list