[Cerowrt-devel] performance numbers from WRT1200AC (Re: Latest build test - new sqm-scripts seem to work; "cake overhead 40" didn't)

Sebastian Moeller moeller0 at gmx.de
Mon Jun 29 04:42:50 EDT 2015


Hi Mikael,

since coke overhead seems to work, you can switch back to link layer none or set the overhead to 0 again. Thanks for testing this, which helps getting sqm-scripts into better shape, but will not be helpful fur your tests. In case you want to try fancy options for cake the advances qdisc option strings in the queue discipline tab should work (caveat no error checking so one typo and the qdisc will most likely not be set-up properly).

Best Regards
	Sebastian



On Jun 29, 2015, at 10:09 , Mikael Abrahamsson <swmike at swm.pp.se> wrote:

> On Mon, 29 Jun 2015, Sebastian Moeller wrote:
> 
>> 	Ah, I see, you are still using tc’s stab mechanism for account of per packet overhead and link layer adjustments instead of cake’s (you need to check the advanced options check box in the link layer adjustments tab, and then select “cake” as the lnk layer adjustment mechanism).
> 
> Ok, so when I changed "stab" to cake, I get the following, but it still only shapes one way. If I change to discipline to "fq_codel" or "pie" I get bidirectonal shaping with otherwise same settings.
> 
> root at OpenWrt:~# cat /etc/config/sqm
> 
> config queue 'eth1'
> 	option interface 'eth0'
> 	option qdisc_advanced '1'
> 	option squash_dscp '0'
> 	option squash_ingress '0'
> 	option ingress_ecn 'ECN'
> 	option egress_ecn 'ECN'
> 	option qdisc_really_really_advanced '0'
> 	option download '50000'
> 	option upload '50000'
> 	option linklayer 'ethernet'
> 	option overhead '42'
> 	option linklayer_advanced '1'
> 	option tcMTU '2047'
> 	option tcTSIZE '128'
> 	option tcMPU '0'
> 	option linklayer_adaptation_mechanism 'cake'
> 	option enabled '1'
> 	option qdisc 'cake'
> 	option script 'simple.qos'
> 
> root at OpenWrt:~# tc -d qdisc
> qdisc cake 8002: dev eth0 root refcnt 9 bandwidth 50Mbit diffserv4 flows noatm overhead 42
> qdisc ingress ffff: dev eth0 parent ffff:fff1 ----------------
> qdisc mq 0: dev eth1 root
> qdisc fq_codel 0: dev eth1 parent :1 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :2 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :3 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :4 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :5 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :6 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :7 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev eth1 parent :8 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> qdisc fq_codel 0: dev ifb4eth0 root refcnt 2 limit 1024p flows 1024 quantum 300 target 5.0ms interval 100.0ms ecn
> 
> root at OpenWrt:~# tc -d class show dev eth0
> class cake 8002:4e1 parent 8002:
> class cake 8002:b89 parent 8002:
> 
> root at OpenWrt:~# tc -d class show dev ifb4eth0
> class fq_codel :12c parent none
> class fq_codel :222 parent none
> 
> root at OpenWrt:~# /etc/init.d/sqm restart
> SQM: Trying to start/stop SQM on all interfaces.
> SQM: /usr/lib/sqm/run.sh Stopping SQM on interface: eth0
> SQM: ifb associated with interface eth0:
> SQM: trying to create new IFB: ifb4eth0
> RTNETLINK answers: File exists
> SQM: /usr/lib/sqm/stop.sh: Stopping eth0
> SQM: ifb associated with interface eth0:
> SQM: /usr/lib/sqm/run.sh Queue Setup Script: /usr/lib/sqm/simple.qos
> + . /usr/lib/sqm/functions.sh
> + [ -z 50000 ]
> + [ -z 50000 ]
> + [ -z eth0 ]
> + [ -z cake ]
> + [ -z cake ]
> + [ -z ethernet ]
> + [ -z 42 ]
> + [ -z 2047 ]
> + [ -z 0 ]
> + [ -z 128 ]
> + [ -z  ]
> + AUTOFLOW=0
> + [ -z  ]
> + LIMIT=1001
> + [ -z  ]
> + ILIMIT=
> + [ -z  ]
> + ELIMIT=
> + [ -z  ]
> + ITARGET=
> + [ -z  ]
> + ETARGET=
> + [ -z ECN ]
> + [ -z ECN ]
> + [ -z 0 ]
> + [ -z 0 ]
> + [ -z  ]
> + IQDISC_OPTS=
> + [ -z  ]
> + EQDISC_OPTS=
> + [ -z  ]
> + which tc
> + TC=/usr/sbin/tc
> + [ -z  ]
> + which ip
> + IP=/usr/sbin/ip
> + [ -z  ]
> + which insmod
> + INSMOD=/usr/sbin/insmod
> + [ -z  ]
> + TARGET=5ms
> + [ -z  ]
> + IPT_MASK=0xff
> + [ -z  ]
> + IPT_MASK_STRING=/0xff
> + [ -z  ]
> + get_ifb_for_if eth0
> + CUR_IF=eth0
> + get_ifb_associated_with_if eth0
> + CUR_IF=eth0
> + tc+  -p filtergrep -o -e ifb[^)]\+
> show parent ffff: dev eth0
> + CUR_IFB=
> + sqm_logger ifb associated with interface eth0:
> + logger -t SQM -s ifb associated with interface eth0:
> SQM: ifb associated with interface eth0:
> + echo
> + CUR_IFB=
> + [ -z  ]
> + create_new_ifb_for_if eth0
> + CUR_IF=eth0
> + MAX_IF_NAME_LENGTH=15
> + IFB_PREFIX=ifb4
> + NEW_IFB=ifb4eth0
> + IFB_NAME_LENGTH=8
> + [ 8 -gt 15 ]
> + sqm_logger trying to create new IFB: ifb4eth0
> + logger -t SQM -s trying to create new IFB: ifb4eth0
> SQM: trying to create new IFB: ifb4eth0
> + /usr/sbin/ip link add name ifb4eth0 type ifb
> RTNETLINK answers: File exists
> + echo ifb4eth0
> + CUR_IFB=ifb4eth0
> + [ -z ifb4eth0 ]
> + echo ifb4eth0
> + DEV=ifb4eth0
> + do_modules
> + insmod act_ipt
> + lsmod+ grep
> -q ^act_ipt
> + insmod sch_cake
> + + grep -q ^sch_cake
> lsmod
> + insmod sch_ingress
> + + greplsmod
> -q ^sch_ingress
> + insmod act_mirred
> + + greplsmod -q ^act_mirred
> 
> + insmod cls_fw
> + + grep -q ^cls_fw
> lsmod
> + insmod sch_htb
> + + lsmodgrep -q ^sch_htb
> 
> + ipt_setup
> + ipt -t mangle -N QOS_MARK_eth0
> + echo -t mangle -N QOS_MARK_eth0
> + sed s/-A/-D/g
> + d=-t mangle -N QOS_MARK_eth0
> + [ -t mangle -N QOS_MARK_eth0 != -t mangle -N QOS_MARK_eth0 ]
> + echo -t mangle -N QOS_MARK_eth0
> + sed s/-I/-D/g
> + d=-t mangle -N QOS_MARK_eth0
> + [ -t mangle -N QOS_MARK_eth0 != -t mangle -N QOS_MARK_eth0 ]
> + iptables -t mangle -N QOS_MARK_eth0
> + ip6tables -t mangle -N QOS_MARK_eth0
> + sqm_logger cake does all the diffserv work - no need for iptables rules
> + logger -t SQM -s cake
> SQM: cake
> + [ 0 = 1 ]
> + sqm_logger Keeping differentiated services code points (DSCP) from ingress.
> + logger -t SQM -s Keeping differentiated services code points (DSCP) from ingress.
> SQM: Keeping differentiated services code points (DSCP) from ingress.
> + CAKE_OPTS=
> + ipt -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + echo+ sed s/-A/-D/g
> -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + d=-t mangle -D PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + [ -t mangle -D PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 != -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 ]
> + iptables -t mangle -D PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + ip6tables -t mangle -D PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + echo+ sed s/-I/-D/g
> -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + d=-t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + [ -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 != -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 ]
> + iptables -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + ip6tables -t mangle -A PREROUTING -i eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + ipt -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + echo+ sed s/-A/-D/g
> -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + d=-t mangle -D POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + [ -t mangle -D POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 != -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 ]
> + iptables -t mangle -D POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + ip6tables -t mangle -D POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + echo+ sed s/-I/-D/g
> -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + d=-t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + [ -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 != -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0 ]
> + iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + ip6tables -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x00/0xff -g QOS_MARK_eth0
> + ipt -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + echo+ sed s/-A/-D/g
> -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + d=-t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + [ -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff != -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff ]
> + echo+ sed s/-I/-D/g
> -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + d=-t mangle -D PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + [ -t mangle -D PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff != -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff ]
> + iptables -t mangle -D PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + ip6tables -t mangle -D PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + iptables -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + ip6tables -t mangle -I PREROUTING -i vtun+ -p tcp -j MARK --set-mark 0x2/0xff
> + ipt -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + echo+ sed s/-A/-D/g
> -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + d=-t mangle -D OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + [ -t mangle -D OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42 != -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42 ]
> + iptables -t mangle -D OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + ip6tables -t mangle -D OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + echo+ sed s/-I/-D/g
> -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + d=-t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + [ -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42 != -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42 ]
> + iptables -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + ip6tables -t mangle -A OUTPUT -p udp -m multiport --ports 123,53 -j DSCP --set-dscp-class AF42
> + [ 50000 -ne 0 ]
> + egress
> + CEIL=50000
> + expr 50000 / 3
> + PRIO_RATE=16666
> + expr 50000 / 6
> + BE_RATE=8333
> + expr 50000 / 6
> + BK_RATE=8333
> + expr 50000 - 16
> + BE_CEIL=49984
> + get_mtu eth0 50000
> + BW=50000
> + cat /sys/class/net/eth0/mtu
> + F=1500
> + [ -z 1500 ]
> + [ 50000 -gt 20000 ]
> + F=3000
> + [ 50000 -gt 30000 ]
> + F=6000
> + [ 50000 -gt 40000 ]
> + F=12000
> + [ 50000 -gt 50000 ]
> + [ 50000 -gt 60000 ]
> + [ 50000 -gt 80000 ]
> + echo 12000
> + LQ=quantum 12000
> + /usr/sbin/tc qdisc del dev eth0 root
> + get_stab_string
> + STABSTRING=
> + [ cake = tc_stab -a ethernet != none ]
> + echo
> + get_cake_lla_string
> + STABSTRING=
> + [ cake = cake -a ethernet != none ]
> + [ ethernet = atm ]
> + STABSTRING= overhead 42
> + sqm_logger cake link layer adjustments:  overhead 42
> + logger -t SQM -s cake link layer adjustments: overhead 42
> SQM: cake link layer adjustments: overhead 42
> + sqm_logger SQM:  overhead 42
> + logger -t SQM -s SQM: overhead 42
> SQM: SQM: overhead 42
> + echo overhead 42
> + /usr/sbin/tc qdisc add dev eth0 root cake bandwidth 50000kbit overhead 42
> + sqm_logger egress shaping activated
> + logger -t SQM -s egress shaping activated
> SQM: egress shaping activated
> + [ 50000 -ne 0 ]
> + ingress
> + CEIL=50000
> + expr 50000 / 3
> + PRIO_RATE=16666
> + expr 50000 / 6
> + BE_RATE=8333
> + expr 50000 / 6
> + BK_RATE=8333
> + expr 50000 - 16
> + BE_CEIL=49984
> + get_mtu eth0 50000
> + BW=50000
> + cat /sys/class/net/eth0/mtu
> + F=1500
> + [ -z 1500 ]
> + [ 50000 -gt 20000 ]
> + F=3000
> + [ 50000 -gt 30000 ]
> + F=6000
> + [ 50000 -gt 40000 ]
> + F=12000
> + e 50000 -gt 50000 ]
> + [ 50000 -gt 60000 ]
> + [ 50000 -gt 80000 ]
> + echo 12000
> + LQ=quantum 12000
> + /usr/sbin/tc qdisc del dev eth0 handle ffff: ingress
> + /usr/sbin/tc qdisc add dev eth0 handle ffff: ingress
> + /usr/sbin/tc qdisc del dev ifb4eth0 root
> + [ 0 = 1 ]
> + sqm_logger Perform DSCP based filtering on ingress. (3-tier classification)
> + logger -t SQM -s Perform DSCP based filtering on ingress. (3-tier classification)
> SQM: Perform DSCP based filtering on ingress. (3-tier classification)
> + get_stab_string
> + STABSTRING=
> + [ cake = tc_stab -a ethernet != none ]
> + echo
> + get_cake_lla_string
> + STABSTRING=
> + [ cake = cake -a ethernet != none ]
> + [ ethernet = atm ]
> + STABSTRING= overhead 42
> + sqm_logger cake link layer adjustments:  overhead 42
> + logger -t SQM -s cake link layer adjustments: overhead 42
> SQM: cake link layer adjustments: overhead 42
> + sqm_logger SQM:  overhead 42
> + logger -t SQM -s SQM: overhead 42
> SQM: SQM: overhead 42
> + echo overhead 42
> + /usr/sbin/tc qdisc add dev eth0 root cake bandwidth 50000kbit overhead 42
> RTNETLINK answers: File exists
> + ifconfig ifb4eth0 up
> + /usr/sbin/tc filter add dev eth0 parent ffff: protocol all prio 10 u32 match u32 0 0 flowid 1:1 action mirred egress redirect dev ifb4eth0
> + sqm_logger ingress shaping activated
> + logger -t SQM -s ingress shaping activated
> SQM: ingress shaping activated
> 
> -- 
> Mikael Abrahamsson    email: swmike at swm.pp.se




More information about the Cerowrt-devel mailing list