[Cerowrt-devel] openwrt build with latest cake and other qdiscs

Dave Taht dave.taht at gmail.com
Tue May 5 04:50:53 EDT 2015


get it from: http://snapon.lab.bufferbloat.net/~cero3/cake/ar71xx/

Not tested on the 3800 yet, only tested on the archer c7v2. I am about
to make my gf's main link run this to see what happens...

* General notes
** This is NOT cerowrt. Device naming is std openrt, firewall std
openwrt, bridged wifi/ethnet, etc. This is basically an attempt at
testing cake, dnssec, etc.
** Unlike the openwrt chaos calmer nightlies this has the gui pre-installed
    (note that it has both the ssl and non ssl version for no reason I
can figure out)
** babel is installed but not enabled on any interface
** numerous other limitations

* archer notes
** You need to opkg update; opkg install kmod-ath10k # and reboot
    (then configure the wifi interfaces as desired)
** sqm defaults to the wrong wan interface for this device
** ath10k does not seem to have working adhoc support (thus no babel over
   5ghz)



-- 
Dave Täht
Open Networking needs **Open Source Hardware**

https://plus.google.com/u/0/+EricRaymond/posts/JqxCe2pFr67



More information about the Cerowrt-devel mailing list