[Make-wifi-fast] Fastest way to setup netperf and flent?

[Valent Turkovic]

Thanks Dave,
I can confirm that using python3 works, flent now draws lots with
matplotlib and shows no errors.

On Fri, Sep 6, 2019 at 12:36 AM Dave Taht <dave.taht at gmail.com> wrote:

> Um, I'd switch to python3 entirely
>
> pip3 install bla
>
>
> On Thu, Sep 5, 2019 at 1:59 PM Valent Turkovic <valent at otvorenamreza.org>
> wrote:
> >
> > On Thu, Sep 5, 2019 at 10:22 PM Toke Høiland-Jørgensen <toke at redhat.com>
> wrote:
> >>
> >> Valent Turkovic <valent at otvorenamreza.org> writes:
> >>
> >> > On Thu, Sep 5, 2019 at 11:57 AM Toke Høiland-Jørgensen <
> toke at redhat.com>
> >> > wrote:
> >> >
> >> >> Valent Turkovic <valent at otvorenamreza.org> writes:
> >> >>
> >> >> > Strange, flent is not seeing matplotlib, any ideas?
> >> >>
> >> >> Could you try running Flent with `-v --debug-error`, please? My guess
> >> >> would be a missing backend or something like that...
> >> >>
> >> >> -Toke
> >> >>
> >> >
> >> > Sure, here it is - https://pastebin.com/raw/MWnbKrXn
> >>
> >> Hmm. It seems that matplotlib is not pulling in numpy as a dependency;
> >> try 'pip install numpy'?
> >>
> >> -Toke
> >
> >
> > Seams like numpy is already installed:
> >
> > pi at raspberrypi:~ $ sudo pip install numpy
> > Looking in indexes: https://pypi.org/simple,
> https://www.piwheels.org/simple
> > Requirement already satisfied: numpy in /usr/lib/python2.7/dist-packages
> (1.16.2)
> >
> > Valent
> >
> > _______________________________________________
> > Make-wifi-fast mailing list
> > Make-wifi-fast at lists.bufferbloat.net
> > https://lists.bufferbloat.net/listinfo/make-wifi-fast
>
>
>
> --
>
> Dave Täht
> CTO, TekLibre, LLC
> http://www.teklibre.com
> Tel: 1-831-205-9740
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/make-wifi-fast/attachments/20190906/2a15a1f8/attachment-0001.html>