[Make-wifi-fast] Fastest way to setup netperf and flent?

[Dave Taht]

Um, I'd switch to python3 entirely

pip3 install bla


On Thu, Sep 5, 2019 at 1:59 PM Valent Turkovic <valent at otvorenamreza.org> wrote:
>
> On Thu, Sep 5, 2019 at 10:22 PM Toke Høiland-Jørgensen <toke at redhat.com> wrote:
>>
>> Valent Turkovic <valent at otvorenamreza.org> writes:
>>
>> > On Thu, Sep 5, 2019 at 11:57 AM Toke Høiland-Jørgensen <toke at redhat.com>
>> > wrote:
>> >
>> >> Valent Turkovic <valent at otvorenamreza.org> writes:
>> >>
>> >> > Strange, flent is not seeing matplotlib, any ideas?
>> >>
>> >> Could you try running Flent with `-v --debug-error`, please? My guess
>> >> would be a missing backend or something like that...
>> >>
>> >> -Toke
>> >>
>> >
>> > Sure, here it is - https://pastebin.com/raw/MWnbKrXn
>>
>> Hmm. It seems that matplotlib is not pulling in numpy as a dependency;
>> try 'pip install numpy'?
>>
>> -Toke
>
>
> Seams like numpy is already installed:
>
> pi at raspberrypi:~ $ sudo pip install numpy
> Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
> Requirement already satisfied: numpy in /usr/lib/python2.7/dist-packages (1.16.2)
>
> Valent
>
> _______________________________________________
> Make-wifi-fast mailing list
> Make-wifi-fast at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/make-wifi-fast



-- 

Dave Täht
CTO, TekLibre, LLC
http://www.teklibre.com
Tel: 1-831-205-9740