[Cerowrt-devel] Switch Issue

[Maciej Soltysiak]

Hi David,

Yup, I know, I'm not using vlans now. What I meant is that when I tinkered
with it, I screwed wired connections.
Hence I offered a working-ethernet config to William.
William, did you have any luck fixing your issue?

Regards,
Maciej Soltysiak

On Wed, Feb 20, 2013 at 8:29 PM, David Lang <david at lang.hm> wrote:

> you have vlans disabled in this config "option enable_vlan 0"
>
> if you want to use vlans > 15 you need "option enable_vlan4k 1" as well
>
> David Lang
>
> On Wed, 20 Feb 2013, Maciej Soltysiak wrote:
>
> Date: Wed, 20 Feb 2013 20:17:19 +0100
>> From: Maciej Soltysiak <maciej at soltysiak.com>
>> To: William Katsak <wkatsak at gmail.com>
>> Cc: "cerowrt-devel at lists.**bufferbloat.net<cerowrt-devel at lists.bufferbloat.net>
>> "
>>     <cerowrt-devel at lists.**bufferbloat.net<cerowrt-devel at lists.bufferbloat.net>
>> >
>> Subject: Re: [Cerowrt-devel] Switch Issue
>>
>>
>> I recently played with VLANs and screwed up it's switching capability
>> exactly as you say.
>> I managed to fix it by restoring the default setup in /etc/config/network
>> (Especially config switch_vlan and ports)
>>
>> Compare your /etc/config/network with what I have (and works):
>> config switch
>>        option name     rtl8366s
>>        option reset    1
>>        option enable_vlan 0
>>        # Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
>>        option blinkrate        2
>>        option max_length 3
>>
>> config switch_vlan
>>        option device   rtl8366s
>>        option vlan     1
>>        option ports    "0 1 2 3 5t"
>>
>> config switch_port
>>        # Port 1 controls the GREEN configuration of LEDs for
>>        # the switch and the section does not correspond to a real
>>        # switch port.
>>        #
>>        # 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
>>        # 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
>>        # 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
>>        # 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
>>        # 14: Link (master); 15: separate register
>>
>>        option device           rtl8366s
>>        option port             1
>>        option led              6
>>
>> config switch_port
>>        # Port 2 controls the ORANGE configuration of LEDs for
>>        # the switch and the section does not correspond to a real
>>        # switch port.
>>        #
>>        # See the key above for switch port 1 for the meaning of the
>>        # 'led' setting below.
>>
>>        option device           rtl8366s
>>        option port             2
>>        option led              9
>>
>> config switch_port
>>        # Port 5 controls the configuration of the WAN LED and the
>>        # section does not correspond to a real switch port.
>>        #
>>        # To toggle the use of green or orange LEDs for the WAN port,
>>        # see the LED setting for wndr3700:green:wan in /etc/config/system.
>>        #
>>        # See the key above for switch port 1 for the meaning of the
>>        # 'led' setting below.
>>
>>        option device           rtl8366s
>>        option port             5
>>        option led              2
>>
>> Best regards,
>> Maciej Soltysiak
>>
>> On Wed, Feb 20, 2013 at 5:01 PM, William Katsak <wkatsak at gmail.com>
>> wrote:
>>
>> Hello,
>>>
>>> Just wanted to see if anyone has seen an issue like this:
>>>
>>> I have a 3800 running Sugarland at a remote site. It was running nice and
>>> reliably, connected to the local network by a VLAN trunked connection (I
>>> have interfaces for the default VLAN, and VLANS 100 and 200 passing
>>> through). Last night it suddenly stopped working. There seems to be no
>>> data
>>> flowing through the switch at all, even though I can ssh to the router,
>>> reboot, poke at it, etc. from over the Internet.
>>>
>>> I see no error messages regarding the switch in the logs or dmesg. Anyone
>>> else see a 3800 switch crap out unceremoniously?
>>>
>>> Thanks,
>>> Bill Katsak
>>>
>>>
>>>
>>> ______________________________**_________________
>>> Cerowrt-devel mailing list
>>> Cerowrt-devel at lists.**bufferbloat.net<Cerowrt-devel at lists.bufferbloat.net>
>>> https://lists.bufferbloat.net/**listinfo/cerowrt-devel<https://lists.bufferbloat.net/listinfo/cerowrt-devel>
>>>
>>>
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20130221/1cf08998/attachment-0002.html>