[Cerowrt-devel] cerowrt 3.7.2-3 released, still in a battle with ipv6
dave.taht at gmail.com
Fri Jan 18 10:54:21 EST 2013
Could you post the generated dnsmasq.conf file and your network file and cc
On Fri, Jan 18, 2013 at 10:26 AM, Dave Taht <dave.taht at gmail.com> wrote:
> There are multiple threads on the stateless dhcp and dhcp implementation
> going on here:
> among other things, "enable-ra" should be getting set in the generated
> dnsmasq conf file and probably isn't right now. Perhaps it can be manually
> I'm hoping ipv6 support isn't mission critical for anyone? I really wasn't
> planning on A) breaking it, or B) fixing it - this week. I DO care about
> exercising the ipv6 portion of the stack a lot though, there are still a
> few new instruction traps left to kill in the kernel (see bug 419)
> (dhcpv6 support also has trouble - can't even assign the delegated prefix)
> On Fri, Jan 18, 2013 at 8:23 AM, Richard Brown <Rich.Brown at intermapper.com
> > wrote:
>> Dave, Maciej,
>> On Jan 17, 2013, at 4:47 PM, <
>> cerowrt-devel-request at lists.bufferbloat.net> wrote:
>> On Thu, Jan 17, 2013 at 1:45 PM, Maciej Soltysiak <maciej at soltysiak.com>
>>> Hi, I configured he.net tunnel according to
>>> http://wiki.openwrt.org/doc/uci/network6 and works with latest 3.7.2-4.
>>> However I don't understand how my client is supposed get an ip6 address.
>>> radvd is gone and I don't see anything handing out me an ip6 addr. Who's
>>> job is it now then?
>> dnsmasq is supposed to do the job now, but the configuration via openwrt's
>> config is in flux. There is documentation floating about on
>> dnsmasq-discuss as well as inside the the dnsmasq-2.66test10 tarball on how
>> to do it at the command line....
>> I have the same problem with 3.7.2-4: my HE.net connection works fine,
>> CeroWrt gets the expected global IPv6 addresses, and each of the five
>> interfaces (not but not the babel ones) get nice routed global addresses
>> allocated from my /48.
>> But my Mac (using either wired or wireless) doesn't get a v6 address.
>> Do you have any links to the dnsmasq documentation (a quick google didn't
>> turn up anything.) Thanks.
>> Cerowrt-devel mailing list
>> Cerowrt-devel at lists.bufferbloat.net
> Dave Täht
> Fixing bufferbloat with cerowrt:
Fixing bufferbloat with cerowrt:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Cerowrt-devel