[Cerowrt-devel] CeroWrt: "Wireless is disabled or not associated" using channel 40 or 48 for 5GHz radio
Richard E. Brown
richb.hanover at gmail.com
Mon Oct 21 14:22:41 EDT 2013
On Oct 21, 2013, at 2:04 PM, Dave Taht <dave.taht at gmail.com> wrote:
> You can't do this in HT40+ mode, which bonds together two adjacent
> channels (36 and 40, 44 and 48), but can't do a channel in the middle
> (40 or 48)
> If you want to use 40 or 48 you can downgrade to HT20 mode (which is
> limited to 150Mbits)
> Yes there should be some sort of error check for this. I note 802.11ac
> is different, allowing bonding non-adjecent channels.
AHAH! So it's supposed to work this way.
You're right - it would be good for the web GUI to enable only the channels that make sense for the particular HT mode shown in the Advanced Settings. Thanks.
More information about the Cerowrt-devel