[Cerowrt-devel] saner defaults for config/firewall

Vincent Frentzel zcecc22 at c3r.es
Mon Feb 24 08:05:47 EST 2014

Thanks Robert.

I indeed had enable_vlan4k in the network. Will definitely try to remove
this. When you enable the vlan do you use the eth0.1, eth0.2, etc.. stanza
for the interface or se00? Is se00 an alias for eth0.1?

On Mon, Feb 24, 2014 at 1:54 PM, Robert Bradley
<robert.bradley1 at gmail.com>wrote:

>  On 24/02/2014 12:45, Fred Stratton wrote:
> There are no button presses to bring the box back, as you can with some
> TP-Link routers.
> You could use a serial lead if you opened the case. No one has mentioned
> trying this with cero on the list.
> In my experience, reflashing via TFTP tends to work well in terms of
> resetting the configuration.
> As an aside, I've noticed that occasionally I get an "enable_vlan4k"
> sneaking into /etc/config/network if I've looked at the vlan page.  If that
> happens, the wired LAN breaks.  Perhaps it's worth checking that first via
> the wireless link?
> --
> Robert Bradley
> _______________________________________________
> Cerowrt-devel mailing list
> Cerowrt-devel at lists.bufferbloat.net
> https://lists.bufferbloat.net/listinfo/cerowrt-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/cerowrt-devel/attachments/20140224/41ae7d77/attachment-0002.html>

More information about the Cerowrt-devel mailing list