[Make-wifi-fast] mesh deployment with ath9k driver changes

Sebastian Moeller moeller0 at gmx.de
Wed Apr 25 02:36:09 EDT 2018


Hi Pete,

Silly question, are the cabins by chance behind a common breaker? Then maybe you could switch the 'backhaul' to Powerline tech?


On April 25, 2018 8:05:34 AM GMT+02:00, Pete Heist <pete at eventide.io> wrote:
>
>> On Apr 24, 2018, at 11:32 PM, Toke Høiland-Jørgensen <toke at toke.dk>
>wrote:
>> 
>> Yeah, with those signal rates, there's going to be quite some pause
>when
>> the slow stations try to transmit something... :/
>
>So then, when would bloat actually become a problem on this hardware? I
>suppose you would need well-connected stations (maybe even just one or
>two) with multiple competing flows. And for the AP to not be one of two
>single channel repeaters with poorly connected stations, where
>contention becomes a problem sooner than bloat.
>
>For starters, I’m going to try to hang one of the two repeaters on the
>same channel off a separate gateway…
>
>_______________________________________________
>Make-wifi-fast mailing list
>Make-wifi-fast at lists.bufferbloat.net
>https://lists.bufferbloat.net/listinfo/make-wifi-fast

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.bufferbloat.net/pipermail/make-wifi-fast/attachments/20180425/5c91f7f7/attachment.html>


More information about the Make-wifi-fast mailing list