[Starlink] Fwd: OpenWrt 22.03.0 first stable release

Dave Taht dave.taht at gmail.com
Mon Sep 5 19:46:27 EDT 2022 

openwrt is our primary platform for developing and deploying new
network tech in general.

An ancient 10 year old release of openwrt was used in the first
starlink router, and a 7 year old release
in the 2nd generation one. I keep hoping they will get caught up in a
year or two more , which would help especially with their ipv6 and
bufferbloat problems.

Anyway... stablizing "my" (mostly wifi) bits of this release just cost
me 6 months of life, and
in the end we settled for stability more than performance. With that
goal achieved, we'been making progress over here -
https://forum.openwrt.org/t/aql-and-the-ath10k-is-lovely/59002/901

and we're always looking for more testers of the cake adaptive
bandwidth stuff on 5g and starlink, which hit 1.0:
https://forum.openwrt.org/t/cake-w-adaptive-bandwidth/135379

For more details about this release see below, or take the plunge and
reflash an old router and give it to a friend that needs it. 1500+
routers are supported!

My thanks to all the thousands of volunteers and corporations that
make this enormous exercise in making hundreds of millions of lines of
code fly in less loose formation.

---------- Forwarded message ---------
From: Hauke Mehrtens <hauke at hauke-m.de>
Date: Mon, Sep 5, 2022 at 4:30 PM
Subject: OpenWrt 22.03.0 first stable release
To: <openwrt-announce at lists.openwrt.org>, <openwrt-devel at lists.openwrt.org>


Hi,

The OpenWrt community is proud to announce the first stable release of
the OpenWrt 22.03 stable version series. It incorporates over 3800
commits since branching the previous OpenWrt 21.02 release and has been
under development for about one year.

Download firmware image for your device (firmware selector):
  * https://firmware-selector.openwrt.org/?version=22.03.0
Download firmware images directly from OpenWrt download servers:
  * https://downloads.openwrt.org/releases/22.03.0/targets/


Highlights in OpenWrt 22.03.0
=============================

Firewall4 based on nftables
===========================
Firewall4 is used by default, superseding the iptables-based firewall3
implementation in the OpenWrt default images. Firewall4 uses nftables
instead of iptables to configure the Linux netfilter ruleset.

Firewall4 keeps the same UCI firewall configuration syntax and should
work as a drop-in replacement for fw3 with most common setups, emitting
nftables rules instead of iptables ones.

Including custom firewall rules through /etc/firewall.user still works,
but requires marking the file as compatible first, otherwise it is
ignored. Firewall4 additionally allows to include nftables snippets. The
firewall documentation
https://openwrt.org/docs/guide-user/firewall/firewall_configuration
explains how to include custom firewall rules with firewall4. Some
community packages that add firewall rules might not work for now, and
will need to be adapted to fw4: this will happen gradually throughout
the lifetime of the 22.03 release series.

The legacy iptables utilities are not included in the default images
anymore, but can be added back using opkg or the Image Builder if
needed. The transitional packages iptables-nft, arptables-nft,
ebtables-nft and xtables-nft can be used to create nftables rules using
the old iptables command line syntax.

Many new devices added
======================
OpenWrt 22.03 supports over 1580 devices. Support for over 180 new
devices was added in addition to the device support by OpenWrt 21.02.
OpenWrt 22.03 supports more than 15 devices capable of Wifi 6 (IEEE
802.11ax) using the MediaTek MT7915 wifi chip.

More targets converted to DSA
=============================
The following targets or boards were migrated from swconfig to DSA with
OpenWrt 22.03 in addition to the systems already migrated with OpenWrt
21.02:

  * bcm53xx: All board using this target were converted to DSA
  * lantiq: All boards using the xrx200 / vr9 SoC
  * sunxi: Bananapi Lamobo R1 (only sunxi board with switch)

Dark mode in LuCI
=================
The LuCI bootstrap design supports a dark mode. The default design
activates dark mode depending on the browser settings. Change it
manually at “System” -> “System” -> “Language and Style”.

Year 2038 problem handled
=========================
OpenWrt 22.03 uses musl 1.2.x, which changed the time_t type from 32 bit
to 64 bit on 32 bit systems, on 64 bit system it was always 64 bit long.
When a Unix time stamp is stored in a signed 32 bit integer it will
overflow on 19 January 2038. With the change to 64 bit this will happen
292 billion years later. This is a change of the musl libc ABI and needs
a recompilation of all user space applications linked against musl libc.
For 64 bit systems this was done when the ABI was defined many years
ago, the glibc ARC ABI already has a 64 bit time_t.

Core components update
======================
Core components have the following versions in 22.03.0:

  * Updated toolchain:
    * musl libc 1.2.3
    * glibc 2.34
    * gcc 11.2.0
    * binutils 2.37
  * Updated Linux kernel
    * 5.10.138 for all targets
  * Network:
    * hostapd 2.10, dnsmasq 2.86, dropbear 2022.82
    * cfg80211/mac80211 from kernel 5.15.58
  * System userland:
    * busybox 1.35.0

In addition to the listed applications, many others were also updated
see the detailed Changelog for more information.
https://openwrt.org/releases/22.03/changelog-22.03.0


Upgrading to 22.03.0
====================
Sysupgrade can be used to upgrade a device from OpenWrt 21.02 to 22.03,
and configuration will be preserved in most cases. Upgrades from a
previous 22.03.0 release candidate are also supported.

  * Sysupgrade from 19.07 to 22.03 is not supported.
  * There is no migration path for targets that switched from swconfig to
    DSA. In that case, sysupgrade will refuse to proceed with an
    appropriate error message:
      Image version mismatch. image 1.1 device 1.0 Please wipe config
      during upgrade (force required) or reinstall. Config cannot be
      migrated from swconfig to DSA Image check failed

-----------------


Full release notes and upgrade instructions are available at
https://openwrt.org/releases/22.03/notes-22.03.0

In particular, make sure to read the regressions and known issues before
upgrading:
https://openwrt.org/releases/22.03/notes-22.03.0#known_issues

For a detailed list of all changes since 21.02, refer to
https://openwrt.org/releases/22.03/changelog-22.03.0

To download the 22.03.0 images, navigate to:
https://downloads.openwrt.org/releases/22.03.0/
Use OpenWrt Firmware Selector to download:
https://firmware-selector.openwrt.org/?version=22.03.0

As always, a big thank you goes to all our active package maintainers,
testers, documenters, and supporters.

Have fun!

The OpenWrt Community

---

To stay informed of new OpenWrt releases and security advisories, there
are new channels available:

a low-volume mailing list for important announcements:
https://lists.openwrt.org/mailman/listinfo/openwrt-announce

a dedicated "announcements" section in the forum:
https://forum.openwrt.org/c/announcements/14

other announcement channels (such as RSS feeds) might be added in the
future, they will be listed at https://openwrt.org/contact

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


-- 
FQ World Domination pending: https://blog.cerowrt.org/post/state_of_fq_codel/
Dave Täht CEO, TekLibre, LLC

More information about the Starlink mailing list